Western Ultramount Fisher Minute Mount 2 Plow Wiring Harness HB5 Snow Fleet Flex

\*\*\*Please note: The 28930 headlight adapter harness is made to fit either HB1 or HB5 headlights depending which side you plug into. While the harness being sold here has those plugs, it is only being sold for a truck with HB5 headlights. This is because this wiring was previously installed on a truck with HB5 headlights and the plug housing on the HB1 side is stiff and would be difficult to plug in. _**Do not buy this harness if your truck has HB1 headlights.**_\\*\\*\\* Here is a set of wiring for a Western Ultramount Plow or a Fisher Minute Mount 2. This the Fleet Flex wiring system that will run a straight blade, v-plow, or expanding plow (8-10, etc) that are a Fleet Flex plow.   Fleet Flex plows have a cover over the pump from factory and there is a solenoid and isolation module mounted on the pump. It has the 4 hole square plug for the handheld or joystick controller. If your controller has a 6 pin connector or round 10 pin connector, this wiring harness is not the right one for your truck. This is a 3 port isolation module with a 2 plug system (battery cable plug, 11 pin headlight plug). This wiring is for vehicles with HB5 headlight bulbs only. Check to make sure your vehicle has HB5 headlight bulbs. If your vehicle does not have HB5 bulbs, this harness will not work for your truck. This wiring will work for 80-03 Ford F150 and 80-04 Ford F250, 350, 450, 550 trucks with HB5 headlights. This harness may work for other trucks as well, but you would have to use the Western Quickmatch or Fisher E-match to confirm that. To check what style headlights you have, take a look at the lense of the headlight from the front of the truck. It should have the headlight stamped on the front of the lense. This harness is for trucks that **do not**have daytime running lights (DRL). **If your truck has daytime running lights, this is not the right harness for your truck**. This wiring is in good shape, but you better have a manual if you plan to install it yourself. The whole harness was gone through, connections and wiring tested and issues with wiring or connections were corrected. Isolation module was tested with factory tester. Also the wire running to the ignition fuse may need a new end as well (also simple and inexpensive). BEFORE BUYING, use the Quickmatch feature on the Western Website or the eMatch feature on Fisher's website to make sure this is the right harness for your truck. When using Western QuickMatch/Fisher E-match, it will state that you need headlamp harness 29050, which is a kit that includes 26357 (port A) and 28930 (ports B and C_**-for HB5 headlights only-see note above**_). Part numbers: The isolation module is part # 29070-1. Controller harness is 28587. Port A is 26357 and ports B and C are 28930. Also included is the 42014 battery cable. This wiring was taken off a used truck because they no longer wanted the plow on the truck. Included is the battery cable, plow control harness, and headlight harness, headlight adapter harness and isolation module (what you see in the pictures). **\*\*\*One note: The housing on the one black headlight plug is partially cut/sliced, but the connector sit plugged together fine (see last picture).\*\*\*** You are buying this setup as is. What you see in the pictures is what you will be receiving. Thanks for looking. Feel free to ask any questions. Check my other lisitngs for more plows parts. Free shipping to US only. Return Policy: Please email me with any questions before purchasing the item. Buyer is responsible to independently confirm fitment before ordering. Buyer needs to do their own research before buying. No returns, refunds, or exchanges for parts that have been purchased incorrectly.

• Brand: Western/Fisher
• Manufacturer Part Number: 42014 29070-1 26357 28930 28587
• Other Part Number: 29050
• Applicable Regions: Ford HB5