Verus/Velox Engineering Brake Duct Kit 13-20 Subaru brZ

1 of the brake ducts hoses (orange) have a small hole In it, you can either get a replacement or just duct tape it. The other orange hose is fine. The black short hoses are showing signs of wear, they work it’s just one of those things where if you want to change it you can. The brake shield I cut the bottom parts because I ran extended lower ball joints (buddy club p1) and the shield was bending and rubbing so I took it upon myself to hack out just enough material so that it can fit without issues so they work with standard ball joints or extended roll centers. No issues with the sandwich duct where it adapts the black inlet hose int the orange hose to route it to the back of your rotor. You will need additional steering rack limiters if you run wider than Oem wheel setup !! I have 1 for each side which is good for Oem setup but if you’re running wider wheels to avoid rubbing they cost $28.95 from verus engineering. I’m giving my own fog light covers that way if you don’t have it, you do now. Along with the LED DRL I also had made a mesh screen to prevent debris from entering in through the duct and they do not restrict. Used this setup in my time attack BRZ. Never experienced brake fade when I paired up with castrol SRF RBF.

• Brand: verus engineering