SONATA 2013 Automatic Transmission 2.4L Plastic Valve Body Pan 842864

Price:
$480

Ships From:
Joliet, Illinois, US

Clicking on links to merchants on this site may result in this site earning a commission.

![Speedway We require these steps be taken for the warranty to be valid. Failure to provide proof these steps were taken will void any warranty. Pre-Installation Requirements: Replace all seals. Install new filter kit. Flush and inspect cooling lines. Align and engage torque converter into the front pump. Fill trans with manufacture specified fluid. Clear all transmission computer codes prior to starting or operating the vehicle. Adjust throttle position sensor cable. ANY TRANSMISSION CLAIMED TO BE DEFECTIVE WILL REQUIRE VERIFICATION THAT ALL STSEPS ABOVE WERE FOLLOWED, AND WE WILL SEND OUT AN INSPECTOR AT OUR DISCRETION TO SUBMIT A REPORT TO US. Donor Vehicle Model : SONATA Year : 2013 Mileage : 91000 (0 = not available or unknown) Stock Number : 25402B Notes : LOW MILES This Part Will Fit These Makes And Models With These Options OPTIMA 11-13 AT, 2.4L, VIN 7 (8th digit), US built SONATA 11-13 AT; 2.4L, VIN C (8th digit), plastic valve body pan About UsPaymentShippingReturnsWarranty About Us We offer quality-tested auto parts. If you have a question about a part please contact us **BEFORE** purchasing. We try to answer all messages within 24 hours. If we are unable to answer your questions before the listing ends the item will be re-listed again soon for you to purchase. Payment All orders must be paid in full prior to shipment. We accept credit card and cash for Local Pickup orders. If payment is not received, an unpaid Item case will be opened for the sake of seller fee reimbursement. Shipping Items are shipped after receiving cleared payment. We ship to US addresses within the continental 48 states. For items shipped via LTL Freight. A commercial address is NOT required. Shipping to a residential address is possible, but will be more expensive. Shipping engines and transmissions have free shipping whether to a business address or residential address. For small items, they will ship with UPS with live tracking information. You will receive an email with tracking information as soon as your part ships. Please allow 1-5 business days for your part to arrive. Returns All returns must be made within 30 days of the date purchase. The original invoice must accompany all returns. Parts must be returned in the same condition, complete, and undamaged. Refunds will be processed within 72 hours of receiving part. Return shipping charges and original shipping charges will not be returned to the buyer when it is the buyer's error, remorse, etc, (changed my mind, found a better price, don’t like it, ordered by mistake). The buyer will pay return shipping charges and original shipping charges, even if it is free shipping. The shipping charges will be taken out of the refund amount. If we have made a mistake, shipped the wrong item, part is defective, etc, we will resolve the issue at our cost. If a part fails to perform properly, please contact us before taking additional action. Our parts are tested and did work on the donor vehicle, we will first assist you or your mechanic to verify the correct installation and programing procedure has been completed. In the unlikely event a part fails within the term of the warranty we will replace the part(s) with a functionally equivalent part or refund the part purchase price, at our option. **TRANMISSION WARRANTY AND INSTALLATION PROCEDURE** Prior to installation of your used transmission, we require these steps be taken for the warranty to be valid. Failure to provide proof these steps were taken will void any warranty. Pre-Installation Requirements: Replace all seals. Install new filter kit. Flush and inspect cooling lines. Align and engage torque converter into the front pump. Fill trans with manufacture specified fluid. Clear all transmission computer codes prior to starting or operating the vehicle. Adjust throttle position sensor cable. **ENGINE WARRANTY AND INSTALLATION PROCEDURE** Prior to installation of your used engine, we require these steps be taken for the warranty to be valid. Also please note while engines may come with accessories these are not covered under any warranty. Engines are guaranteed against knocking and excessive smoking. The warranty is void if engine's heat tab is melted or removed. Pre-Installation Requirements:Drain and replace engine oils to manufacture suggested levels. Replace oil, air, and fuel filters. Replace valve cover gaskets. Replace oil pan gasket and rear main seal. If needed replace timing gears, chains, or belts & gaskets. Replace thermostat & gasket. Flush cooling system and re-fill. Install new spark plugs & wires. Install new belts and hoses. Failure to provide proof any of these steps were not taken may void the warranty. Warranty All parts come with a standard 30 day warranty, please contact us for details prior to ordering. Details will be included with the packing slip for each order. Labor and costs associated with part installation are not included in the warranty, parts only. We have extended warranties as well for up to 2 years, please contact us for that information. ![](https://www.efusionworld.net/estore/hollander/listing/images/solera-logo.png) ![](https://www.efusionworld.net/estore/hollander/listing/images/gold.png) Copyright © 2022, All Rights Reserved. Copyright © 2022, All rights reserved. Design & Developed By : eFusionWorld

Conditions & Options: LOW MILES
Genuine OEM: Yes
Interchange Part Number: 400.HY1S13
Designation: Used
PartNumber: 400
Mileage: 91000
Model: SONATA
Make: HYUNDAI
Year: 2013
Stock #: 25402B
DescriptionPartCondition: VIN C 8TH DIGIT, 90,617 MILES
Inventory ID: 842864
VIN #: 5NPEB4AC3DH796882
Donor VIN: 5NPEB4AC3DH796882
Brand: Hyundai
Manufacturer Warranty: No Warranty
PartOut ID: A-98071585

Why Shop With Us?

Cart

SONATA 2013 Automatic Transmission 2.4L Plastic Valve Body Pan 842864

Sign-Up Now!

Sign up for our monthly newsletter and receive exclusive deals and new product alerts: