SBC Chevrolet Comp Cams Roller race camshaft 50mm - Solid Roller .595 lift

READ!: Camshaft is a re-usable SBC steel roller camshaft from Comp Cams -CC.   I emailed CompCams with the numbers and this was their reply: Lobe lift is .397/.397 = .595 lift with 1.5 rocker ratio.   Duration at .050 is 258/262.   107 LSA.   .018/.020 Hot Lash - Solid Roller. SOLD AS IS, NO RETURN \*50 mm camshaft \*Steel Roller - Solid - .018/.020 Lash \*Approximately .595" lift with 1.5 ratio rocker \*Approximately 1.140" base circle \*Approximately .397 lobe lift \*107 CL \*CC J1944 R \*Comp 437314375 \*Mechanical fuel pump lobe; must use steel cam compatible rod i.e. brass tipped \*Distributor gear good; must use compatible distributor driven gear i.e. brass \*Designed for later model SBC with cam plate - 1 piece style main seal. NOTE: Make sure you understand the requirements of a 50mm camshaft needing possible block cam bore work for roller bearings. I contacted Comp Cams and using the numbers above, determined all the original specs. This sale does not include lifters. Race, drag, track camshaft. Must use suitable spring set-up with proper pressures, clearances and associated parts. This cam is sold without warranted or guarantee. It is visually used, has been cleaned up as per what you see in the pictures. It is straight with no damage. I would suggest shipping insurance to guard against today's lousy customer care issues with USPS. Shipping in the continental United States only unless other arraignments are made in advance of final payment. PayPal is preferred payment method. Other arrangement can be made with pre-pay. SOLD AS IS, NO RETURN

• Country of Origin: United States
• Brand: Comp Cams
• Type: Camshaft
• Material: Steel
• Finish: Polished
• Performance Part: Yes