Rebuilt Supercharger Snout 5.0 Land Rover Range Jaguar Griptec Pulley 2.35" 59.6

**Rebuilt w/ Griptec 2.35" 59.6mm Pulley** **Jaguar Land Rover 5.0 Supercharger Snout** **PEEK Isolator - Best Available** **Rebuilt with Eaton OEM Bearings** **PEEK Heavy Duty Isolator** 2.35" or 59.6mm Pulleys are about 7.5% Reduction in Diameter **_You can run with stock belt and stock tune_** Gives approximately 1.5 psi additional boost! Typical Gains of 25 - 30 HP $300 Core Charge included in price! **Must be Genuine Jaguar Land Rover Snout not the Cheap** **import snouts now available!** **Quaintly Superchargers Does not refund Core Charge for NON OEM Parts** **YOU MUST VERIFY YOUR SUPERCHARGER HAS** **THE VACUUM BOOST BYPASS ACTUATOR** **!** **SEE SECOND PICTURE** **This is under the front edge of the plastic engine cover!** **Installation Notes:** **The snout is sealed to the supercharger with RTV (silicone), scrap off the old and apply some new sparingly. There is one bolt in the snout inlet on some superchargers, see 2nd picture. The TB gasket is reusable but a new one is C2Z28265. I recommend a bolt torque of 19 ft-lb for the snout bolts.** You will be refunded your deposit when we receive your rebuild-able core return. Most damage to superchargers snouts occur from attempted disassembly. Bent pulleys will reduce deposit. Other damage can reduce core deposit refund. Contact with any questions.

• Brand: Quality Superchargers
• Other Part Number: LR058080
• Type: Supercharger
• Interchange Part Number: C2D38554
• Manufacturer Warranty: Yes
• Fitment Type: Performance/Custom
• Manufacturer Part Number: QS461
• Country/Region of Manufacture: United States