Rebuilt OEM Performance Pulley Jaguar Land Rover 5.0 Supercharger Snout Vacuum

**Rebuilt w/ Stainless Performance Pulley** **Jaguar Land Rover 5.0 Supercharger Snout** **PEEK Isolator - Best Available** **Rebuilt with Eaton OEM Bearings** **PEEK Isolator** 60mm Pulleys are a 7.5% Reduction in Diameter **_You can run with stock belt and stock tune_** (competition calls this 12% boost) Gives approximately 1.5 psi additional boost! Typical Gains of 25 - 30 HP $200 Core Charge included in price! **Must be Genuine Jaguar Land Rover Snout not the Chinese snouts now available!** **Most OEM snout have casting numbers on the snout - see pictures** **Quaintly Superchargers Does not refund Core Charge for NON OEM Parts** **YOU MUST VERIFY YOUR SUPERCHARGER HAS** **THE VACUUM BOOST BYPASS ACTUATOR** **!** **SEE SECOND PICTURE** **This is under the front edge of the plastic engine cover!** **Installation Notes:** **The snout is sealed to the supercharger with RTV (silicone), scrap off the old and apply some new sparingly. There is one bolt in the snout inlet on some superchargers, see 2nd picture. The TB gasket is reusable but a new one is C2Z28265. I recommend a bolt torque of 19 ft-lb for the snout bolts.** You will be refunded your deposit when we receive your rebuild-able core return. Most damage to superchargers snouts occur from attempted disassembly. Bent pulleys will reduce deposit. Other damage can reduce core deposit refund. Contact with any questions.

• Brand: Quality Superchargers
• Other Part Number: LR058080
• Type: Supercharger
• Interchange Part Number: C2D38554
• Manufacturer Warranty: Yes
• Fitment Type: Performance/Custom
• Manufacturer Part Number: QS461
• Country/Region of Manufacture: United States