Programmed 20850927 Fuel System Control Module | GM FSCM | Plug & Drive

### Programmed 20850927 Fuel System Control Module \| GM FSCM \| Plug & Drive   ## Restore Your Vehicle’s Reliability and Performance Are you battling frustrating engine stalls, a no-start condition, or a persistent Check Engine Light with codes like P069E or U0109? A faulty Fuel System Control Module (FSCM) is often the culprit, disrupting the critical communication between your engine’s computer and the fuel pump. This isn’t just an inconvenience; it’s a reliability issue that can leave you stranded. Get back on the road with confidence with this direct-replacement, fully programmed **Programmed 20850927 Fuel System Control Module**, the definitive solution to restore your vehicle’s fuel delivery system to perfect working order. ### Common Symptoms & Your Direct-Fit Solution A failing FSCM can manifest in several ways, often being misdiagnosed as a bad fuel pump. If you’re experiencing any of the following, this module is your solution: - **Sudden Engine Stalling:** The engine cuts out while driving or idling due to fuel pressure loss. - **No-Start or Hard-Start:** The engine cranks but won’t start, or takes an excessively long time to fire up. - **Check Engine Light:** Common trouble codes include P069E, P0230, P0606, or U0109 (Lost Communication With Fuel Pump Control Module). - **Reduced Engine Power:** The vehicle may enter a ‘limp mode’ with sluggish acceleration. - **Erratic Fuel Gauge Readings:** The FSCM can interfere with the signal from the fuel level sender. Our service eliminates the biggest hurdle in this repair: programming. We flash this module with the latest official GM software calibrated specifically to your vehicle’s Vehicle Identification Number (VIN) _before_ it ships. This means no expensive tow to the dealership and no extra programming fees. It’s a true plug-and-drive fix. ### Features & Benefits - ✔ **Arrives Ready to Install:** We professionally program the module to your specific VIN. No extra steps, no special tools, no dealer visit required. - ✔ **Updated GM Software:** Flashed with the newest calibrations from General Motors to ensure optimal performance, efficiency, and longevity. - ✔ **Restores Proper Function:** Eliminates common trouble codes and restores precise fuel pressure control for smooth, reliable engine operation. - ✔ **Direct-Fit Replacement:** Engineered to match the original form, fit, and function of part numbers **20850927**, **20791901**, **20827745**, and **20877116** for a hassle-free installation. - ✔ **Cost-Effective Solution:** Save hundreds of dollars in diagnostic and programming fees at a dealership or repair shop. - ✔ This unit is backed by our one-year replacement warranty. > #### An Expert’s Insight on the FSCM > > As a technician, I’ve seen countless drivers replace their fuel pump only to find the real problem was the Fuel System Control Module. In modern GM vehicles, the FSCM isn’t just a simple relay; it’s a sophisticated computer. It receives commands from the Engine Control Module (ECM) and precisely varies the voltage to the fuel pump. This ensures optimal fuel pressure across all driving conditions, from idle to full throttle. When it fails, communication is lost, and the fuel pump either doesn’t run or runs erratically. This **Programmed 20850927 Fuel System Control Module** is the correct fix because it not only replaces the failed hardware but also ensures it’s running the most stable and current software for your exact vehicle, preventing future communication glitches. ### Frequently Asked Questions **Do I need to take this module to the dealer for programming?** Absolutely not. The main benefit of our service is that we program the module to your vehicle’s specific VIN before we ship it to you. It will arrive ready for installation right out of the box. **How do I provide my vehicle’s VIN?** After you complete your purchase, you can send us a message with your 17-digit VIN. For faster processing, you can also add your VIN to the ‘notes’ section during checkout. **Is this the same as a Fuel Pump Driver Module (FPDM)?** Yes, the terms Fuel System Control Module (FSCM) and Fuel Pump Driver Module (FPDM) are often used interchangeably by manufacturers for this component. It performs the same function of controlling the fuel pump. **Where is the FSCM located on my vehicle?** The location varies by model. On most GM trucks and large SUVs (like the Silverado, Tahoe, Escalade), it’s typically mounted on the driver’s side frame rail. On sedans and crossovers (like the Regal, CTS, Acadia), it is often found in the trunk area, near the rear crossmember, or behind an interior quarter panel. **Will this fix a P069E trouble code?** Yes, the DTC P069E (Fuel Pump Control Module Requested MIL Illumination) is one of the most common codes indicating a fault with the FSCM. Replacing your old module with this correctly **Programmed 20850927 Fuel System Control Module** is the standard and effective repair for this code. Please enter it in the payment notes and save to ensure we receive it. Orders without a VIN within our 2-business-day handling period may be canceled, as programming cannot proceed without it. ### Shipping - **Processing Time:** Reliably shipped within 2-3 business days. ### Warranty Enjoy peace of mind with a **one-year replacement warranty** on this part, effective from the date you receive it. Labor costs are not covered. If the part fails within the warranty period, we’ll replace it with a comparable unit or refund your purchase price, ensuring a hassle-free experience. **Return Address:** **Highway71autoparts** **9131 Highway 71 NE** **Spicer, MN, 56288**

• Manufacturer Part Number: 20850927
• Country/Region of Manufacture: United States
• Manufacturer Warranty: 1 Year
• Superseded Part Number: 20791901, 20827745, 20850927, 20877116
• Conditions & Options: Programmed to your VIN GM: 20791901
• Genuine OEM: Yes
• Interchange Part Number: 591-02000
• PartNumber: 591
• Model: REGAL
• Make: CHEVROLET TRUCK
• Year: 2011
• Brand: GM