Programmed 2010-2012 GM Fuel System Control Module 20791901

### Programmed 2010-2012 GM Fuel System Control Module 20791901   ### Is Your GM Truck or SUV Stalling, Hesitating, or Refusing to Start? A faulty Fuel System Control Module (FSCM), also known as a Fuel Pump Driver Module, is one of the most common reasons for perplexing fuel delivery issues in 2010-2012 GM vehicles. If you’re experiencing a crank-no-start condition, sudden engine stalling, or a check engine light with fuel-related codes, you’ve likely found the culprit. This isn’t just an inconvenience; it’s a reliability issue that can leave you stranded. Get your vehicle back to its dependable self with our pre-programmed FSCM solution. #### Common Symptoms & Your Solution Don’t let a bad module disrupt your day. If your vehicle is exhibiting any of these signs, this part is the definitive solution: - Engine cranks but will not start - Vehicle starts and then immediately stalls - Loss of power or hesitation during acceleration - Check Engine Light with codes like P069E, P0230, or U0109 - Erratic or inaccurate fuel gauge readings This genuine GM **Fuel System Control Module 20791901** is the answer. We take the guesswork and hassle out of the repair by pre-programming the module specifically to your vehicle’s VIN before it ships. This means no expensive trip to the dealership for programming—it arrives ready for a straightforward, plug-and-play installation. #### Features & Benefits - ✔ **VIN-Programmed for You:** We flash the module with the latest GM software updates using your vehicle’s VIN. This ensures perfect communication with your vehicle’s computer systems and optimal performance from day one. - ✔ **Skip the Dealership:** Save hundreds of dollars and significant downtime by avoiding mandatory dealer-only programming. This module is ready to install right out of the box. - ✔ **Restore Peak Performance:** A new, correctly programmed FSCM restores precise fuel pressure control, leading to smoother idling, better throttle response, and restored engine power. - ✔ **Direct-Fit Replacement:** Engineered to be a perfect match for the original, guaranteeing a hassle-free installation with factory mounting points and electrical connectors. Compatible with part numbers **20791901**, **20827745**, **20877116**, and **20850927**. - ✔ **This unit is backed by our one-year replacement warranty.** #### Expert Insight: Why Pre-Programmed is Non-Negotiable As a technician, I’ve seen countless vehicle owners try to save a few dollars by installing a used FSCM from a salvage yard. It never ends well. These modules are VIN-specific ‘smart’ devices. Installing one from another vehicle will, at best, not work and, at worst, cause communication errors across the vehicle’s network. The **Fuel System Control Module 20791901** is the brain of your fuel pump, constantly adjusting voltage to maintain perfect pressure. Our service ensures this critical component has the latest GM-approved software, which often corrects the very logic flaws that led to the original failure. This isn’t just a replacement part; it’s a permanent fix that restores factory reliability. ### Frequently Asked Questions **How does the programming process work?** It’s simple. After you complete your purchase, you will need to provide us with your vehicle’s 17-digit VIN. Our technicians will use this number to flash the module with the correct software and calibration files directly from GM for your specific vehicle. We handle all the technical work so it’s ready for installation upon arrival. **Is this a true plug-and-play part?** Yes. Because we program the module to your VIN before shipping, it is a direct plug-and-play replacement. No further calibration or programming is required. Simply disconnect the old module, install the new one, and you’re ready to go. **Where is the FSCM located on my vehicle?** On most trucks and large SUVs like the Silverado, Tahoe, or Escalade, the FSCM is located on the driver’s side frame rail, often near the spare tire. On other vehicles like the Traverse or Enclave, it may be on a rear crossmember. Always consult a repair manual for your specific model to confirm the exact location. **Will this fix a Check Engine Light with code P069E?** Yes, P069E (Fuel Pump Control Module Commanded OFF) is one of the most common diagnostic trouble codes indicating a failed FSCM. Replacing your old module with this pre-programmed unit is the correct and most reliable fix for this code. **Is this compatible with part number 20827745 or 20877116?** Absolutely. This module is a direct replacement for multiple GM part numbers, including **20791901**, **20827745**, **20877116**, and **20850927**. We program it to function perfectly for your vehicle regardless of which of these original part numbers you have. Please enter it in the payment notes and save to ensure we receive it. Orders without a VIN within our 2-business-day handling period may be canceled, as programming cannot proceed without it. ### Shipping - **Processing Time:** Reliably shipped within 2-3 business days. ### Warranty Enjoy peace of mind with a **one-year replacement warranty** on this part, effective from the date you receive it. Labor costs are not covered. If the part fails within the warranty period, we’ll replace it with a comparable unit or refund your purchase price, ensuring a hassle-free experience. **Return Address:** **Highway71autoparts** **9131 Highway 71 NE** **Spicer, MN, 56288**

• Country of Origin: United States
• Manufacturer Part Number: 20791901
• Manufacturer Warranty: 1 Year
• Superseded Part Number: 20791901, 20827745, 20850927, 20877116
• Conditions & Options: Programmed to your VIN GM: 20791901
• Genuine OEM: Yes
• Interchange Part Number: 591-02000
• PartNumber: 591
• Model: TRAVERSE
• Make: CHEVROLET TRUCK
• Year: 2011
• Brand: GM