Programmed 2003-2007 Hummer H2 BCM | 15137393 | Restore Full Control

### Programmed 2003-2007 Hummer H2 BCM \| 15137393 \| Restore Full Control   ## Regain Command of Your Hummer H2 Is your Hummer H2 suffering from baffling electrical problems? Unresponsive windows, flickering lights, or a climate control system with a mind of its own can undermine the confidence you should have in your vehicle. Restore the sophisticated electronic nervous system of your truck with our pre-programmed Body Control Module (BCM), the central hub for your vehicle’s comfort and security features. This isn’t just a replacement part; it’s the definitive solution to get your H2 operating with the precision and reliability you expect. ### Common Symptoms & Your Solution A failing BCM can cause a cascade of frustrating issues. If you’re experiencing any of the following, this module is the fix you need. This expertly prepared **2003-2007 Hummer H2 BCM** directly addresses these common failure points: - Intermittent or complete loss of power windows, door locks, or interior lighting. - HVAC and climate control blower motor malfunctions. - Erratic windshield wiper behavior. - Security system faults, leading to no-start conditions. - An illuminated airbag warning light, often accompanied by DTC B1001. - A variety of other body-related diagnostic trouble codes. ### Features & Benefits - ✔ **Plug-and-Play Installation:** This module arrives pre-programmed to your Hummer’s specific VIN. This critical step eliminates the need for expensive dealership programming, allowing for a straightforward, direct installation. - ✔ **Restore Full Functionality:** Regain precise control over all body electronics. From door locks to climate controls, this BCM ensures all components work in harmony as the factory intended. - ✔ **OEM-Standard Quality:** Built to meet or exceed original equipment specifications, ensuring dependable performance and longevity for your vehicle, whether it’s a daily driver or an off-road explorer. - ✔ **Hassle-Free Process:** We do not require you to send back your old part. There is no core charge, saving you time and money on return shipping. - ✔ **Guaranteed Performance:** This unit is backed by our one-year replacement warranty. Drive with confidence knowing your purchase is protected against defects. > **From the Shop Floor:** One of the most common diagnostic headaches we see with these GM trucks and SUVs is a set of seemingly unrelated electrical gremlins. A customer might complain about the radio, the dome light, and the power locks all acting up at different times. The culprit is often a single failing Body Control Module. By providing a properly programmed **2003-2007 Hummer H2 BCM**, we take the guesswork out of the repair. It’s a single, powerful fix that restores order to the entire vehicle, saving hours of diagnostic time and frustration. ### Frequently Asked Questions **What does a Body Control Module do on a Hummer H2?** The BCM acts as the central computer for your H2’s body electronics. It controls non-engine related functions like power windows, door locks, security system, interior and exterior lighting, wipers, and the HVAC system, ensuring they all work together correctly. **Is this BCM difficult to install?** Installation is typically straightforward for someone with basic mechanical skills. The BCM is located on the driver’s side, accessible from under the dash. Because it comes pre-programmed, the physical swap is all that’s needed, often taking less than 15 minutes. Always disconnect the battery before starting. **Why is VIN programming so important?** VIN programming loads your Hummer’s specific software and configurations onto the module. Without it, the BCM won’t be able to communicate properly with the other computers in your vehicle, leading to incorrect function or complete failure of certain features. Our service saves you a mandatory and costly trip to the dealership. **Will I need to do anything after installing this module?** In some cases, yes. If your airbag light is on, a procedure to sync the airbag system (SDM) may be needed using a professional scan tool. A brake pedal position sensor relearn might also be required on some models. These are standard procedures after a BCM replacement. **What if my airbag light is on after installation?** This is a common security measure. You will need a qualified technician with a high-level scan tool to perform the ‘Setup SDM Primary Key in BCM’ procedure. This syncs the new BCM with the airbag system and will turn off the warning light. **Does this part come with a warranty?** Absolutely. This unit is backed by our one-year replacement warranty, giving you peace of mind with your purchase. Please put your VIN number in the payment notes and ensure you push save or we will not receive it. If we do not receive your VIN number within the 2 business day handling time, we will need to cancel the sale as we cannot proceed without it. Please also add your phone number with your address in case we need to get in touch with you for more information before programming and shipping the module. ### Shipping - **Handling time:** 2-3 Business Days. ### Warranty This part comes with a **one year replacement warranty** unless otherwise stated. The warranty period starts when you take possession of the part. No labor warranty is provided. In the event a part sold with a warranty fails to operate within the warranty period, we will replace the part with a functionally equivalent part or refund the purchase price. **Our return address is:** **Deering's Auto** **9131 Highway 71 NE** **Spicer, MN, 56288**

• Manufacturer Warranty: 1 Year
• Superseded Part Number: 10367690, 10383536, 15064149, 15116066, 15136225, 15136877, 15137393, 15137394, 15137395, 15194170, 15198116
• Conditions & Options: Programmed to your VIN GM: 15116066
• Genuine OEM: Yes
• MPN: 15116066
• Interchange Part Number: 591-01130
• PartNumber: 591
• Model: Hummer H2
• Make: CHEVROLET TRUCK
• Brand: CHEVROLET TRUCK