OEM Genuine Meyer Snow Plow Power Angle Cylinder 1.5x10 05887 07968 cross-drill
Price:
$75
Ships From:
Williamsport, Pennsylvania, US
Clicking on links to merchants on this site may result in this site earning a commission.
Here is a New Take Off OEM Meyer angle cylinder for straight blade plows. This is Meyer part number 05887. This is cylinder is used interchangeably with Meyer part number 07968. **\*\*\*This cylinder is being sold as used due to the damage/pits to the chrome shown in the pictures.\*\*\*** This would be a great option if you were just needing the base end of the cylinder. These are cross drilled on the end so the port can be mounted upright or out the side and the port is an SAE o-ring style. Before buying, make sure this is the correct cylinder for your plow, please check the following measurements. This is a 1 1/2" x 10" cylinder. This has a 5/8" mounting hole at each end. When closed, center to center of the mounting holes is 16" and end to end of the cylinder is 17.5". Fully open, this cylinder is 27.5" long. 10" is the length of the cylinder stroke. If your cylinders are pitted on the chrome like this one is, that allows water to get into the cylinder each time it retracts which will eventually cause freeze up in your hydraulic system. What you see in the pictures is what you will be receiving, nothing else. Thanks for looking and see my other listings for more plow parts. Free shipping to the 48 continental US states only. Thanks and feel free to ask any questions that you may have. Return Policy: Please email me with any questions before purchasing the item. Buyer is responsible to independently confirm fitment before ordering. Buyer needs to do their own research before buying. No returns, refunds, or exchanges for parts that have been purchased incorrectly.
- Brand: Meyer
- Manufacturer Part Number: 05887
- Other Part Number: 07968
