OEM 1980-1984 Ford F-350 Dana 70 Rear Hub "Lug Concentric" Full Floating

_**I**_ _**got this “OEM 1980-1984 Ford F-350 Dana 70 Rear Hub that is Lug Bolt**_ _**Concentric” from an estate I bought.**_ _**The**_ _**Gentleman repaired Cars & Trucks for decades.**_ _**This**_ _**was in his inventory as “OEM 1980-1984, Ford F-350, Dana 70, Rear Hub, Dual Rear Wheels, Lug Bolt Concentric”.**_ _**NOTE: IMPORTANT: CRITICAL: This Hub is "Lug-Centric".   It is designed to Accept Lug-Centric Wheels.   Lug-Centric means the Rims are Dimpled or Coined at the Lug Holes so the Wheel is Centered by the Lug Nuts (Not the Hub).   If your Wheels are Flat where the Lug Nuts go on; This Hub Will NOT work because this Hub Will Not Center that style Wheel.**_ _**NOTE:**_ _**These Hubs are becoming extremely difficult to come by.**_ _**NOTE: This may fit other Years & Models but I'll leave fitment up to you!**_ _**NOTE:**_ _**This was removed from a 1983 Ford F-350, Dual Rear Wheels, Dana 70, that had Dimpled or Coined Wheels,**_ _**NOTE: I'm including the Inner & Outer Bearing.   In my opinion they Look Perfectly fine to use but I'll leave that decision up to you!**_ _**NOTE: There are NO Races in the Hubs so you will need to Buy & Install Races for both bearings If you don't have them already.**_ _**Measurements:**_ _**A) From the Face of the Hub where the Axle Touches to the Face of where the Wheel Touches is about 3 5/8".**_ _**b) The Overall width of the Hub is about 6 7/16".**_ _**c) From the face of where the Seal Seats to the Face of where the Drum Touches is about 1 7/8".**_ _**Look**_ _**at the Pictures Closely & Verify this will serve your purpose**_ _**before buying.**_ _**If**_ _**you are not pleased with it, you may return it to me within 30 days**_ _**for a full purchase price refund.**_ _**Stock**_ _**\# 10-5-25-8A**_ _**location**_ _**is in BIN # BOBBY”S TRUCK**_

• Brand: Ford
• Wheel Stud Quantity: 8
• Material: Steel
• Vintage Part: Yes
• Placement on Vehicle: Rear
• Bolt Pattern: 8 X 6.5