New Rebuild! MERCEDES Heater Mono Valve 2 HOSE 1YR Warranty W124 R129 300 260

AUTHENTIC OEM MERCEDES BOSCH PART! NOT A COPY FOR ONE HEATER VALVE WITH 2-**HOSE CONNECTIONS,** **NOT 3 CONNECTIONS (available in our other listing)** SEE PICTURES FOR COMPARISON LOT # 219- L2CHV ONE MERCEDES W124 NEWLY REMANUFCTUREDELECTRO MAGNETIC HEATER CONTROL MONO VALVE,  WITH 2-HOSE CONNECTIONS ONE YEAR WARRANTY (SAME WARRANTY AS A NEW PART) Complete and ready for installation. PIC  001 830 20 84  2  hose connections for earlier model cars NOTE THAT THE EARLIER MODEL CARS ONLY HAD TWO HOSE CONNECTIONS AND THE LATER ONE'S HAD THREE.   **PLEASE MAKE SURE TO MATCH YOUR NEEDS.** You don't think you need to spend a little more for a truly Remanufactured part?  ... see the BEFORE pictures (pics # 6-8). Note the aged and torn gasket, corroded piston, heavy deposits from inadequate coolant changing or radiator stop-leak, and another with severe rust that even I couldn't save. There's no way to tell what condition the valve is in until it's disassembled.  From last batch of 3, only one was re-buildable.   The other two were total losses; yet when you plugged it in they still seemed to make the right noises.   The last TWO pictures show the rebuilt and tested internals. Why make another gamble with a part that's just been ripped from a car in the salvage yard and put in a box? For a few more bucks, we re-built this one so that this will be worry-free for at least a year and likely (if you change your coolant regularly) for the rest of the time you have your car. Has the same warranty as a brand new part. 000 830 7284 (two hose connections) for: 260E thru 4/90 124.026 300E thru 4/90 124.03 300CE 124.05 300CE-24 thru 4/90 124.051 300TE thru 4/90 124.09 300D-T 124.133 300TD-T 124.193 300E 4M thru 4/90 124.23 300TE 4M thru 4/90 124.29 300SL-24 129.061 SL320 129.063 500SL 129.066 500SL 129.067 SL500 129.067 SL500 129.068 001 830 20 84 (three hose connections) for: 1990-1993 300E 1990-1992 300CE 1992-1993 400E 1992-1993 500E 1990-1993 300TE 1990-1993 300D 1994 E420 1994 E500 **REBUILD PROCESS:** dis-assembled, cleaned, external cases and internal cavities inspected for fractures and defects, internal parts (piston, plunger, gasket, spring) refurbished or replaced as necessary, electrical connections inspected, lubricated, plunger action confirmed, re-assembled, bench tested for positive piston action, anti-tamper seals applied.  ONE YEAR warranty. If your heat is stuck on or you don't feel any heat when you want to, this is the likely fix.   Simple 20 minute repair.   Loosen the two hose clamps.   Retract the hoses (easier to do when the engine is warm so that the hoses are more pliable - warm not hot since you'll spill some coolant when you take the hoses off). Unplug the electrical connector.   Slide the rubber grommet toward closest to the front of the engine toward the front and toward the back for the grommet closest to the back to free them.   Install in the reverse order.... spray a little silicone lube into the valve before connecting... done!!! This is one of those parts that you'll need eventually.   Might as well get this one and put it on the shelf while you can get it at a decent price. Exact configuration as the part pictured.   Please check the part number and match it to the one you have to replace. **WE** WANT YOU TO BE COMPLETELY SATISFIED WITH YOUR ORDER, IF REASONABLY POSSIBLE.  IF YOU HAVE A WORRY AFTER RECEIVING YOUR ORDER, FIRST, PLEASE SEND US AN MESSAGE VIA " I HAVE A QUESTION ABOUT MY ITEM" BEFORE OPENING A RETURN ITEM REQUEST.   IF A RETURN IS NEEDED, IT WILL BE VIA THE "CANCEL ORDER" PROCESS FOR A REFUND. Returns accepted. No Hassle. YOU MUST FIRST CONTACT US FOR A RETURN AUTHORIZATION NUMBER (RMA). Unless the part is defective or we have shipped the wrong parts by our mistake, we will refund the purchase price less the listed cost of shipping, handling, and re-stocking charge.   Return must be shipped within 7 days of Notification and returned in the same condition as originally sent. Label and Paint seals must be intact for refund approval. No alterations are allowed. Please inspect the item thoroughly- especially the installation and mounting points, for visible defects BEFORE installation or attempted use.   Once you have installed or used the item, you will not be able to return the item based on a defect that would have been visible prior to its installation or use. Cash Refunds can only be made during the 14-Day Return Period. Beyond the Return Period, Warranty Exchange Only for the balance of the warranty period- if applicable. INTERNATIONAL BUYERS:Before you Bid, click on the "shipping" tab and then click on the "calculate" tab so that you can know what your additional shipping costs are. This only for the shipping cost.   This does not include any import fee, VAT, or duty fee that might be applicable to your location. IF YOU USE THE LOWER COST SHIPPING SERVICE (INTERNATIONAL FIRST CLASS) AND YOUR PACKAGE IS LOST BY YOUR LOCAL MAIL SERVICE, YOU GIVE UP THE RIGHT TO CLAIM THAT YOUR PACKAGE WAS NOT DELIVERED.   If you choose the more expensive USPS Priority Mail, then there is only a small risk that of loss from your local delivery service.** If you are looking for a specific part that you don’t see listed here or anywhere else for a price that makes sense to you, let us know what you need and what you would be willing to pay for it.   We’ll set up a custom listing for you.

• Non-Domestic Product: No
• Brand: Mercedes-Benz
• Other Part Number: 1986 1987 1988 1989 1990 1991 1992 1993 1994 1995
• Interchange Part Number: 260E 300TE CE D TD 300SL 500SL SL500 1996 1997
• OE/OEM Part Number: 0018302084
• Manufacturer Warranty: 1 Year
• Custom Bundle: No
• Features: 100% Leak Tested, 2 HOSE CONNECTIONS
• Country/Region of Manufacture: Germany
• Vintage Part: Yes
• Modified Item: No
• Placement on Vehicle: Front