Motor Man | Denso 23250-0D040 Fuel Injector Set | Extreme Heat Protection +300°f

****Genuine Denso Fuel Injector with added heat protection**** ****OEM Parts \| 1 Year Replacement Warranty**** ****Precise fuel delivery \| Flow Matched \| Exact OE Fitment**** - **3M aluminum thermal blocking tape protects injectors from overheating** - **protects within -65°f to 300°f temperatures!** - **Inner layer relieves injector body from heat soak** - **outer jacket offers moister protection from water and chemicals** - **New orings and grommets included for installation** - **USPS Priority Shipping \|** Expedited **Delivery Available** - **1 Year Replacement Warranty** - **Excellent Customer Service** Remanufactured injectors with added dual layer extreme heat protection Each injector has an application of high temp 3M aluminum heat barrier tape 4.6 mil thick with added protection from temps ranging from -65°f up to 300°f 2nd application of high temp, moister and chemical resistant jacket sealed over thermal tape Injectors are flow tested and flow matched before shipping Flow matched within 1% of dynamic flow rate All new seals included - required for installation flow matched set of 4 injectors 1 year replacement warranty **Compatible Part Numbers:** 23250-0D040, 23250-22040, 23209-0D040, 23209-22040 3780, 297-0003, FJ415 **Chevrolet** 2000-2002 Prism 1.8L 1ZZFE engine **Pontiac** 2003-2008 Vibe 1.8L 1ZZFE engine **Toyota** 2000-2005 Celica GT 1.8L 1ZZFE engine 2000-2003 Corolla 1.8L 1ZZFE engine 2003-2006 Matrix 1.8L 1ZZFE engine 2000-2005 MR2 Spyder 1.8L 1ZZFE engine **All Of Our Fuel Injectors Are Professionally Remanufactured From OEM Cores By The Following Process:** - Fuel Injectors Are Carefully Examined For Cosmetic Damage - Injectors Are Cleaned In A Heated Ultra-Sonic Tank To Remove Grease - Each Injector Is Ohm Tested For Proper Resistance - Injectors Are Striped Of O'rings, Pintle Caps, and Filters - Injectors Are Bead Blasted To Remove Body Paint / Rust - Injectors Are Washed In A Second Heated Ultra-Sonic Tank To Loosen Internal Debris - Each Injector Is Back-Flushed In A Third Heated Ultra-Sonic To Remove Internal Debris - Injectors are Rinsed And Purged Of Cleaning Fluid - Spray Pattern's Are Inspected For Each Injector - The Dynamic & Static Flow Rate Is Measured For Each Injector To Be Sure Its Performing At Proper OEM Specifications - Each Injector Is Leak Tested At 43.5 PSI - Injectors are Carefully Grouped Into Flow-Matched Sets Based on Dynamic Flow - Each Injector is Polished or Clear Coated To Achieve Its Best Cosmetic Appearance - Each Injector Is Assembled With New Components (filter, spacer, orings, pintle caps) - Injectors Are Lubricated To Ensure Proper Functionality Upon Installation - All our Injectors Are Flow Tested and Lubricated THE DAY Your Order Is Placed.   We Never Send You A Product That Has Been Sitting On A Shelf **Remanufactured By:** **Motor Man Fuel Injection** **6246 W. Weidman Rd** **Weidman, MI 48893** **Business Hours :** **Monday-Friday 9AM - 4PM EST** **Domestic Shipping Method:** **USPS Priority Mail 2-3 Day Service anywhere in the US** **USPS Express 1-2 day delivery depending on zip code** **Global Shipping Method :** **USPS Priority Express 3-5 Day Delivery Anywhere in the world** **Product Warranty and Return Information** **Product Warranty** ·Motor Man’s liability is limited to the replacement or repair of the defective fuel injector(s) for one year from date of purchase. ·We reserve the right to repair the defective fuel injector  purchased through Motor Man or replace with reconditioned units at our discretion. ·In certain cases when a part is out of stock and no longer available, and the faulty product cannot be repaired, the original purchase price will be refunded. ·No allowance will be given for labor, installation costs, or damage claims. ·Any evidence of contamination, tampering, abuse, mishandling, or improper installation of our product voids this warranty. ·Shipping costs are the customer’s responsibility.   Motor Man Fuel Injection will not cover shipping related costs for any reason. **Product Replacement & Return Policy** ·All uninstalled products may be returned for a \*full refund\* within 30 days of purchase date less S&H fees. ·New fuel injectors that have been installed are not returnable. ·Reconditioned fuel injectors that have been installed may be returned for a partial refund within 30 days and will incur a 20% restocking fee. ·Any product returned that shows sign of tampering, abuse, mishandling, or improper installation, is broken or damaged in any way is non returnable or refundable under any circumstance. ·Shipping costs are the customer’s responsibility.   Motor Man Fuel Injection will not cover shipping related costs for any reason. ·Any product purchased from Motor Man considered to be faulty must be returned before a replacement part can be issued. ·All product returns must be accompanied by a copy of your invoice and a return merchandise tag. ·To obtain a return merchandise tag please call or email and one will be sent to you via email. Motor Man Fuel Injectionsells a full line of New, Reconditioned and Remanufactured MPI & TBI Fuel Injectors. We only sell Quality OEM Fuel Injectors.

• Brand: Denso
• Type: Fuel Injector
• Fuel Type: Gasoline
• Manufacturer Part Number: 23250-0D040
• Placement on Vehicle: Front
• Country of Origin: United States
• Manufacturer Warranty: Yes
• Interchange Part Number: 23250-22040, 23209-22040, 23209-0D040
• Modified Item: Yes
• Custom Bundle: No
• Other Part Number: 842-12248
• Fitment Type: Direct Replacement
• Non-Domestic Product: No
• Number of Pieces: 4