Meyer E47 SNOW PLOW PUMP REBUILT

**Meyer E47 SNOW PLOW PUMP REBUILT.** **I have been rebuilding Meyer power units for years. Units are torn down to nothing and go through several stages of cleaning to remove contaminants. Parts including assembly studs/hardware are all wire wheeled to remove any rust or corrosion. Anti-seize is applied to proper parts to assist in any future disassembly. Units are assembled with a new seal kit and run extensively on a test stand to check for function. Cylinders are honed. Valves/motors are cleaned/inspected/serviced/replaced as needed. Crossover valve on EVERY unit I do gets rebuilt including a new spring. Pressures are set to factory spec and amp draw is checked to be within spec. They are left under pressure for hours if not overnight to confirm no leak down or fluid leaks. Finally, the oil is drained, and the filters are recleaned before going to paint. Units are shipped empty per shipping requirements.** **About me: My name is Kevin. I have been rebuilding Meyer units for roughly 10 years. I have a 1200 sq ft workshop and if you are within driving distance I welcome you to come do business in person. My service after the sale is extremely good. If you have a question 5 years down the road, you can call, and I will help. If you have a wiring issue you can reach out. Should you be replacing a faulty unit, sometimes I can offer a core exchange depending on location/shipping cost. I also buy old units if you have a surplus collecting dust. Please feel free to send a PM or call. Thank you for your business.** **Phone orders are welcome, and I can provide a tax-free purchase! If you have a PO Box listed as your shipping address you MUST contact me before purchasing as UPS does not deliver to boxes.** PLEASE ALLOW FOR 2-3 BUSINESS DAY LEAD TIME ON BUILDS

• Brand: Meyer
• Manufacturer Part Number: E47
• Country of Origin: United States
• Part Type: Snowplow Pump