Meyer E47 Snow Plow Pump

Meyer E47 Power Angle Snow Plow Pump, completely rebuilt. Unit disassembled, cleaned, and inspected. All hydraulic valves and electric coils are tested. Any defective/questionable components replaced. Most valves and coils have been replaced with new or newer tested components. New seal kit installed. Lift ram has been replaced if any pitting was present, to prevent moisture infiltration. Must be refilled with low temp snow plow fluid, which contains a deicer, upon receiving. Fill to 1 inch from top. New hydraulic connectors installed. Test jig used to check motor current draw and set pump hydraulic pressures. This is a retirement hobby, so the number of hours required to perfect each pump is not a determining factor. Only excellent, functioning pumps are sold! Free shipping to lower 48 states, contact first for shipping to Alaska, will try to ship same day…Buyer is never disappointed, if there is a problem I will correct it to your satisfaction. Proud to keep 100% rating. Suggest flushing plow angle rams on blade, before use, to remove any contaminants left in system. Flushing procedure is available on Smith Brothers web site. Pictures are of sample pumps. I am willing to assist anyone, at anytime, with any troubleshooting questions. Thank you, Rich

• Brand: Meyer
• Manufacturer Part Number: E47
• Country of Origin: United States
• Part Type: Snowplow Pump