Mercedes W201 190e 5-speed Overdrive Manual Transmission Conversion Swap '83-94

This swap kit components were removed from a 190e many years ago.   I don't recall what year and the mileage, but I believe it was a 4cyl gas motor (OM102).   The transmission appeared to be in good condition, but since it is so rare, I had it checked out by a transmission shop, as described below.   The goal was to remove all pieces necessary to swap from automatic transmission to manual in a 190e gas, diesel, 4 or 6 cylinder (trans fits OM601, OM602, OM603, OM102, and OM103 motors).   The listing includes the following parts: Inspected and sealed 5-speed overdrive transmission and all bell housing hardware. The complete two-piece driveshaft with both flex discs and all mounting hardware. Original shifter links and clips, OEM shifter mechanism with boot and knob, and all associated hardware. Hydraulic clutch master cylinder, slave cylinder, and all hydraulic lines and clips.   Includes flex line. Throw out bearing and release arm. Flywheel and bolts, and clutch mounting bolts.   I had the flywheel surfaced locally by Southland Clutch. Rear mounting bracket, hardware, and rubber mount.   Includes exhaust hanger bracket. Complete clutch and brake pedal assembly with 2 switches and related pigtail wires and hardware. The OEM black under-dash panel with cut out for both pedal arms. Any hardware, sensors, plugs, and wires not mentioned above. Condition: Transmission: INSPECTED, REPAIRED/REBUILT, and SEALED:  I took the transmission to a manual transmission specialist who opened and inspected all the gears, bearings, and synchro gears for adverse wear.   He found now worn parts inside this transmission and told me the unit was in "beautiful condition."   He reassembled the transmission and installed new seals at all necessary locations. I have not run this rebuilt unit in a car, but I expect it be 100% operational The flywheel is like new.   All hardware was cleaned.   The front flex disc and center bearing should be renewed.   The shift boot should be replaced.   The throw-out bearing is in good shape, as well as all other parts in this kit.   The buyer will want to purchase a new clutch disc and pressure plate.   All other components are either in good used condition.   All hardware is in good shape and likely includes more pieces than you will need. Shipping: Included in the listed price within the lower 48 states.    The kit will be shipped by Fedex Ground or UPS, and packaged in at least 3 separate boxes. Come pick it up to save shipping $ and I'll make a refund of at least $200.

• Country of Origin: Germany
• Housing Material: Aluminum
• Items Included: Mounting Hardware, Shift Arm, Shift Fork, Shift Shaft, Slip Yoke, Spring, Driveshafrt, Hydraulics, Pedal Assembly
• Manufacturer Part Number: 5spkit
• Shift Linkage Type: External Rod
• Mounting Hardware Included: Yes
• Vintage Part: Yes
• Modified Item: No
• Brand: Mercedes-Benz
• Type: Manual Transmission
• OE/OEM Part Number: R1242610201, 124260070171741100486207
• Part Brand: Mercedes
• Universal Fitment: No
• Performance Part: No