IHI JH5 TURBO BILLET COMPRESSOR WHEEL FOR AUDI A3 A4 A5 Q5 VW PASSAT 2008-2012

Turbo\_Crafts is pleased to offer this high-quality billet compressor wheel for IHI JH5 turbocharger found in the Audi A3, A4, A5, Q5, VW Passat, and Seat Leon and Exeo vehicles with the 2.0 turbo engine. Compatibility chart listed below. If you have any questions, don't hesitate to contact us for a consultation. Dirty and debris can get into the intake tract and impact the compressor wheel. It does not take much to damage the thin blades on a turbo spinning at 100,000+RPM. A damaged compressor wheel cannot be reused due to disbalance and performance issues and since the OEM compressor wheel is not available individually from IHI, the only options are to purchase aftermarket parts, an aftermarket cartridge, or a complete turbocharger assembly. All these options are far more expensive than a compressor wheel replacement. \-\-\----------------------------- **Turbo Part Number Compatibility:** - 06H145702L - 06H145702S - 06H145702G - 06H145702Q - 06H145702R \-\-\----------------------------- **Vehicle Compatibility:** - 2009-2012 Audi A4, A4 Avant 2.0T - 2009-2012 Audi A5 coupe and convertible 2.0T - 2009-2012 Audi Q5 2.0T - 2008-2010 Audi A6 2.0T - 2008-2010 Volkswagen Passat 2.0T - 2008-2010 Seat Saxo 2.0T - 2008-2010 Seat Exeo 2.0T \-\-\----------------------------- This listing includes **ONE**(1) billet compressor wheel. The CHRA cartridge is not included and shown only for fitment and display purposes. \-\-\----------------------------- **BILLET COMP WHEEL FEATURES AND ADVANTAGES** • **OEM 6 blade design:** Conventional design is 6 tall main blades and 6 short splitter blades. This compressor wheel retains this same design to prevent unnecessary ECU recalibration. • **Slim blade design:** Performance feature designed to increase airflow. Slim blades have a smaller cross-section allowing more area between blades for air.  Flow is increased at same turbo speed.  Thinner blades also weigh less for a reduced moment of inertia and faster spool. • **Slim hub design:** Another feature designed to increase airflow. Slim hub increased air volume with each rotation. Flow is increased at same turbo speed. Smaller cross-section hub weighs less for a reduced moment of inertia and faster spool. • **Material selection:** Conventional compressor wheels made by casting aluminum alloy. PRE compressor wheels are machined from 6061-T6 billet aluminum alloy block. Billet blocks are forged. This compacting of molecules increases material density and strength. Increased strength of billet material allows for a reduced blade and hub cross-section and weight reduction without increasing internal stresses. • **Balancing:** PRE compressor wheels inspected and computer balanced to less than 0.5g-cm^2. Although we have customers installing this product as-is without any recorded adverse effects, we always recommend a rotor balancing or VSR balancing of the rotation assembly as part of the professional turbo rebuild service. \-\-\----------------------------- We offer complete Audi VW IHI turbo rebuild services. We can replace turbine shafts, compressor wheels, oil seals, journal bearings, thrust bearings, housings, worn wastegate repair, wastegate rattle repair, and perform balancing services. Turbo rebuild price starts at $300. Wastegate rattle repair costs $300. Please inquire about cost and lead time for your specific situation.

• Brand: Turbo Crafts
• Manufacturer Part Number: IHI-JH5
• Interchange Part Number: 06H145702L, 06H145702S, 06H145702G, 06H145702Q, 06H145702R
• Manufacturer Warranty: No Warranty