Hooker Blackheart 71221007HKR Engine Mount Brackets 68-1972 A-Body LS Swap

 # 71221007HKR Hooker BlackHeart Engine Mount Brackets 1968-1972 A-Body LS Swap Engine Mounting Bracket Kit- Stock Position. These Hooker BlackHeart engine swap mounting brackets facilitate the installation of an GM LS motor into a 1968-72 A-Body as part of your LS swap project. This mounting bracket kit is part of the most comprehensively engineered system of mounting components, headers and exhaust systems available for this application. The entire Hooker BlackHeart swap system is designed to decrease your total swap installation effort and cost, while increasing the engineered quality of your vehicle and compatibility of these components with other popular aftermarket components. LS Oil Pan 302-2 can be used with these mounts \*\*. Compatible with the following accessory drive systems:\_x000D\_ \_x000D\_ Holley or stock F-body/GTO (GTO alternator not compatible, must be relocated or replaced with an F-body alternator)\_x000D\_ \_x000D\_ Corvette (excluding the A/C compressor/bracket, which must be relocated)\_x000D\_ \_x000D\_ Truck (must use smaller 5" diameter power steering pump pulley and stock Denso A/C compressor without rear pressure sensor) \_x000D\_ \_x000D\_ These engine brackets ARE NOT compatible for use with the stock vehicle A/C evaporator case.\_x000D\_ \_x000D\_ Use factory Chevelle crossmember to install all transmissions other than 4th-gen F-body T56/T56 Magnum and 4L80/4L85 - Locates engine to stock SBC engine/transmission mating plane - See instructions for additional information - Plate steel construction-provides a durable cost-effective LS engine mounting solution - Provides optimized U-joint angles for vehicles with stock to moderately lowered suspension ride heights - Allows installation of a GM TH350, TH400 or TH2004R transmission using a factory 1968-72 Chevelle transmission crossmember, without having to cut the vehicle floor open - 4L60-4L70, 4th-gen F-body T56/T56 Magnum or 4L80/4L85 transmission installations require extensive floor cutting; T56/T56 Magnum and 4L80/4L85 installations require the use of a Hooker 71222007HKR transmission crossmember - Broad accessory drive compatibility- allows the use Holley or stock Corvette, truck, F-body or GTO accessory drive systems (some stock FEAD component exclusions apply) - Provides best-available clearance for installation of low-mount A/C compressor - Holley 302-2 oil pan compatible- provides for easy bolt-in installation process and clearance for steering tie rod ends - Dual rubber/poly mount compatibility- allows use of 4th-gen F-body factory rubber mounts, or aftermarket poly replacement inserts - Clear Zinc plated finish- provides attractive corrosion-resistant appearance General Policies **Payment Method** - We gladly accept PayPal and All Major Credit Cards. Don't have a PayPal account? **Warranty & Return** **Policy** - We want to make sure that every customer is completely satisfied with their purchase. Although obsolete, scratch & dent and used items do not have a warranty, we understand that things happen and every situation is different. Please let us know of any issues you may have before leaving feedback so we have an opportunity to make things right. We will do everything possible to make sure you are fully satisfied with your purchase and we want to earn your continued business! - We want you to be completely satisfied with your purchase – please let us know if you have any problems with your purchase **before** **leaving feedback** so we have a chance to make it right – we want your repeat business!

• Brand: Hooker BlackHeart
• Manufacturer Warranty: NO
• Item Height: 4.300
• Manufacturer Part Number: 71221007HKR
• Material: Steel
• Item Length: 8.800
• Finish: Zinc
• Item Width: 6.600