Holley Snap On Style Choke Kit Blade, Shaft, All Parts Used 1850 3310 Carb parts

This is a complete set of used choke parts for Holley 4160 & 4150 style four barrel vacuum secondary carburetors. These are Holley choke parts. You get one used shaft, one used blade, the vertical rod, the mechanism from the side of the carb, the lever for the throttle shaft, and even the paper block off disc for the vacuum port. The entire collection of parts came from the same carb. These snap together style choke blades were used on Holley carbs after the screw on blade style. Check the holes on the sides of your carb choke airhorn. This newer style shaft is about .380 diameter. So the holes in your choke airhorn should be about .382 inch. If the holes in your choke airhorn are smaller than .380, then you need the older style "screw together" choke parts. **All of these parts fit****newer****Holley 1850 and 3310 carbs like the 1850** **-3 and later. 1850-4, etc.** **3310** **-3 and later carbs,** **and many others.** Fits popular vacuum secondary carburetors like; 0- 1850, 3310 as well as many others. These parts fit many of the vacuum secondary Holley four barrel carbs carbs too. SAVE HERE! Plus, I'm offering **Free Shipping**, USPS Ground padded envelope. To get these parts from Holley you have to pay over $70 bucks. Parts are used, dirty, need to be cleaned. Yet the seller (that's me) has nothing to do with that and cannot make it mandatory. So, if you please, I'd appreciate it if you not only leave positive feedback, but also complete the five star rating system when you receive your parts. Thanks. PLEASE READ THE FOLLOWING INFORMATION COMPLETELY. -FREE SHIPPING! USPS padded envelope. -Sold as-is. -No return. No Refund. -Paypal prefered. Payment due within 2 days. -I ship this part once per week to the 48 states USA only using USPS ground padded envelope. -I ship within 10 days of receiving payment. -Please contact me about questions or problems BEFORE leaving feedback. I will do my best to help you. -People sometimes ask what I mean by "needs to be rebuilt". Wellll.......It's used. Dirty. Removed from a used car. I would not install it on another car until it was disassembled, cleaned, lubed, and re-assembled. If you are looking for a part that is clean and you need only remove it from the box and install it on a car, then I strongly suggest you buy a Brand New Holley from Holley, Jegs Performance, Summit Racing, or your local auto parts store. Good Luck. -AND MOST IMPORTANTLY........If these conditions are not understood or agreeable, you are not welcome to bid on this item. Thanks.

• Brand: Holley
• Type: Choke
• Manufacturer Warranty: No Warranty
• Items Included: Screws
• Surface Finish: used dirty