Holley Screw On Style Choke Blade and Shaft Used 1850 3310 Holley Carb parts

This is a set of used choke blade parts for Holley 4160 & 4150 style four barrel carburetors. These are Holley choke parts. You get one used shaft, one used blade, 2 used stock screws and 2 new brass screws. These screw together style choke blades were used on Holley carbs before the snap-on blade style was invented. Check the holes on the sides of your carb choke airhorn. This older style shaft is about .248 diameter. So the holes in your choke airhorn should be about .250 inch. If the holes in your choke airhorn are bigger than .250, then you need the newer style "snap together" choke parts with a .380 dial shaft. **All of these parts fit****older** **Holley 1850 and 3310 carbs like the 1850** **-1 or -2 and older. Also fits older 9834, 6619, and double pumpers like older 4776, 4777, 4778, 4779, 4780, 4781, etc.** Fits popular vacuum secondary carburetors like; 0- 1850, 3310 as well as many others. These parts fit many of the vacuum secondary Holley four barrel carbs and Double Pumper Mechanical Secondary carbs too. Picture is an example of what you will receive. I re-use the same picture over and over. SAVE HERE! Plus, I'm offering **Free Shipping**, USPS Ground padded envelope. To get these parts from Holley you have to pay over $40 bucks. Parts are used, dirty, need to be cleaned. Yet the seller (that's me) has nothing to do with that and cannot make it mandatory. So, if you please, I'd appreciate it if you not only leave positive feedback, but also complete the five star rating system when you receive your parts. Thanks. PLEASE READ THE FOLLOWING INFORMATION COMPLETELY. -FREE SHIPPING! USPS padded envelope. -Sold as-is. -No return. No Refund. -Paypal prefered. Payment due within 2 days. -I ship this part once per week to the 48 states USA only using USPS ground padded envelope. -I ship within 10 days of receiving payment. -Please contact me about questions or problems BEFORE leaving feedback. I will do my best to help you. -People sometimes ask what I mean by "needs to be rebuilt". Wellll.......It's used. Dirty. Removed from a used car. I would not install it on another car until it was disassembled, cleaned, lubed, and re-assembled. If you are looking for a part that is clean and you need only remove it from the box and install it on a car, then I strongly suggest you buy a Brand New Holley from Holley, Jegs Performance, Summit Racing, or your local auto parts store. Good Luck. -AND MOST IMPORTANTLY........If these conditions are not understood or agreeable, you are not welcome to bid on this item. Thanks.

• Brand: Holley
• Type: Choke
• Manufacturer Warranty: No Warranty
• Items Included: Screws
• Surface Finish: used dirty