Holley Carburetor Pair of 9834 Carbs 4 barrel Tunnel Ram Vac Sec 1200 cfm used
Price:
$159.99
Ships From:
Plantsville, Connecticut, US
Clicking on links to merchants on this site may result in this site earning a commission.
This is a pair of high performance Holley 4160 series four barrel Vacuum Secondary Carburetors suitable for use on a Tunnel ram intake or blower supercharger. Both carbs are Holley number 9834. Each carb is 600 cfm and will provide a combined 1200 cfm at wide open throttle. One carb has electric choke and the other carb has no choke. This is a good way to run them as a pair on the street. Both carbs have banjo style fuel inlet fitting. You need to rebuild these carbs and tune them for your engine. Do your own research. Carbs are Dirty. Need to be rebuilt. The throttle levers have been tack welded to the throttle shafts because throttle levers on Holley carbs always loosen up. One carb has the bowls painted black. The black paint should come right off with carb cleaner spray. And you have to clean these carbs when you rebuild them anyway. When you rebuild this carb, if you take it apart and find something missing…please contact me. I have lots of Holley parts. I will be happy to send any missing internal parts you need. Thank You.** Parts have been sitting for a while and are dirty and need to be cleaned and rebuilt. Yet the seller (that's me) has nothing to do with that and cannot make it mandatory. So, if you please, I'd appreciate it if you not only leave positive feedback, but also complete the five star rating system when you receive your parts. Thanks. PLEASE READ THE FOLLOWING INFORMATION COMPLETELY. -Parts have been sitting for a while and are dirty and need to be cleaned and rebuilt. -Sold as-is. -No Return. No refund. -Please Note\*\*Paypal payment due within 2 days. -I ship once per week to the 48 states USA only using UPS ground. -I ship within 10 days of receiving payment. -Please contact me about questions or problems BEFORE leaving feedback. I will do my best to help you. -People sometimes ask what I mean by "needs to be rebuilt". Wellll.......It's used. Dirty. Removed from a used car. I would not install it on another car until it was disassembled, cleaned, lubed, and re-assembled. If you are looking for a part that is clean and you need only remove it from the box and install it on a car, then I strongly suggest you buy a Brand New Holley from Holley, Jegs Performance, Summit Racing, or your local auto parts store. Good Luck. -AND MOST IMPORTANTLY........If these conditions are not understood or agreeable, you are not welcome to bid on this item. Thanks. On Oct-18-07 at 15:17:27 PDT, seller added the following information: After purchasing, pay instantly with your credit card through PayPal!
- Brand: Holley
- Type: Carburetor
- Manufacturer Warranty: No Warranty
- OE/OEM Part Number: unknown
- Fitment Type: Direct Replacement
- Manufacturer Part Number: 9834
- Mounting Hardware Included: No
- Universal Fitment: Yes
- Country of Origin: United States
- Performance Part: Yes
