Hansshow Tesla CCS Combo 1 Adapter For USA DC Fast Charging Model3/Y/X

NOTE: Not the Tesla OEM Adapter. IN STOCK, SHIP FAST! - Compatible Models:Hansshow CCS Combo 1 adapter is compatible with CCS chargers for Tesla Model 3, Model Y, Model S, Model X.  Early models(Model 3 2018) need to be confirmed for compatibility.  Usually, After 2021 2022 is enabled CCS. ( You can check the system setting at Control>Software>Additional Vehicle Information>CCS adapter support to see if your Tesla is compatible with CCS. ) - Fast DC Charging:Hansshow CCS1 adapter for Tesla let you charge at over 5,000 CCS fast chargers nationwide.On average 150kW - 180kW charging rate,allowing you to fully charge within a matter of hours. (Note: Charge rate will also depend on the specifications of the charging station) - Compact&Portable:Add your fast charging options with the Hansshow CCS Combo 1 Adapter which is lightweight and portable, easy to store and use for charging, just pull it out, connect it to the CCS1 charger, and then charge your Tesla. - Quality Assurance:FCC certificate. The exterior of the CCS 1 adapter adopts PC insulation thermoplastic material, and the Conductive contact pin made of copper alloy+silver plating, wear resistance and aging resistance, with the flame retardant grade UL94V-0. - Adapter Performance:Maximum rating with 500V and 300A, Hansshow CCS combo 1 adapter is most efficient at operating temperatures - 20° f to 122° F. Waterproof and anti leakage, protection grade up to IP66. \\* Harness Retrofit A DIY retrofit solution for enabling CCS1 adapter capability on your older Model 3 2018-2021, when using a Gen4 ECU (Note: Need to get the Gen4 ECU from your Tesla Service Center(SC) FIRST. - Please check if the CCS feature is installed in your EV ( [HOW TO CHECK : CLICK HERE](https://youtu.be/ZSZ240Ls34s "https://youtu.be/ZSZ240Ls34s")). If it’s “not installed”, then you need this wire retrofits below in order to enable the Tesla CCS1 adapter. - Gen4 ECU :1537264-00-B Gen4 charge port ECU (Bundle of wires need to be connected in line with Gen4 ECU ) Harness retrofit Installation Video :[Click Here](https://youtu.be/C7WV7W3v-L0 "https://youtu.be/C7WV7W3v-L0") NOTE: 1\. Not the Tesla OEM Adapter. ## How To Verify Compatibility Of Hansshow CCS 1 Adapter On Your Tesla In The Car Display Open Additional Vehicle Information under the Software tab of the car settings page and check for "CCS adapter support" info. Control>Software>Additional Vehicle Informantion> CCS Adapter Support-Check If Enabled 

• Brand: Tesla
• Manufacturer Part Number: 10R00002