Ford Superduty Plow Mount & Electrical Harnesses

Read full description and ask any questions you may have. This DOES NOT come with the plow or the plow controls. This was on a truck I bought used a couple years ago and I’m finally getting around to listing it. The truck that it was removed from is a 2019 F-350 from the Charlotte NC area which usually receives very little snow so it was likely hardly ever used. The hitch install is pretty straight forward and bolts onto the frame (you’ll have to remove the front bumper but that’s a pretty easy task). The hitch also comes with the brackets that install above the sway bar links, which seems to be sold separately from a lot of sellers. For shipping purposes I’ll be unbolting the crossmember to make it more compact. Now for the electrical portion. FULL TRANSPARENCY I DONT KNOW MUCH ABOUT THIS. This comes with the isolation module, fuse block and wire harnesses to isolate the electronics associated with the plow but I don’t think this has anything to do with the plow itself. Do your research before buying. Again, this comes off a 2019 F-350 6.7 diesel with upfitter switches. I would assume this would work on anything 2017-2022 but again do your research. I also want to say that there’s a lot of wiring to route through the front of your truck. You will need to remove the passenger side battery, battery box, air filter housing, top plastic trim above the grill and radiators, and have the patience of a saint to route the wires. The connectors will go in between the connections on all the lights (turn signals, park lamps) but this did splice into two wires on the headlights to pick up a hot and ground. You’ll also need to run one of the harnesses to the drivers side to run into the cab and the upfitter fuse panel. I’m sure you wouldn’t need to have the upfitter switches and can hook it up to your own switch. It will take a little work and some patience but if you’re mechanically inclined I don’t think you’ll have an issue. If you’re not mechanically inclined I’d strongly suggest taking it to a pro for installation. This should make someone a pretty nice package for less money. You’ll just need to add your plow and In-Cab controls to the plow and you should be good to go. The mounts seem to go for about 600 and the harnesses and module can be found in kits for around 500 and that’s without the fuse block that goes on the battery hot. I do have some pictures of removal that I’m happy to email over to the buyer to if you’d like. Again, this does NOT come with the plow or the plow controls. If it’s not pictured, it’s not included. This is also for sale locally so if it sells there, I’ll remove this ad. Happy to answer any questions so feel free to ask.

• Brand: Western
• Manufacturer Warranty: 1 Year
• Manufacturer Part Number: Ultramount 31269-1
• Mounting Hardware Included: Yes
• Material: Steel
• Surface Finish: Powder-Coated
• Placement on Vehicle: Front
• Receiver Size: 2in.
• Part Type: Snowplow Mount
• California Prop 65 Warning: Cancer and Reproductive Harm.