For Toyota Tacoma 1995-2004 LuK LFW199 Single Mass Flywheel
Price:
$101.68
Ships From:
Rockville Centre, New York, US
Clicking on links to merchants on this site may result in this site earning a commission.
LuK conventional flywheels are dynamically balanced to reduce vibration and improve clutch performance. All new – never remanufactured – every flywheel component is engineered and built to original-equipment specifications, including the ring gear and dowel pins. Single Mass Flywheel (LFW199) by LuK®. LuK conventional flywheels are dynamically balanced to reduce vibration and improve clutch performance. All new – never remanufactured – every flywheel component is engineered and built to original-equipment specifications, including the ring gear and dowel pins. **Specifications:** - Number of teeth, starter ring gear: 120 - Centering diameter / dowel hole: 10.827 inch - Centering diameter / dowel hole: 275 mm - Ring Gear Thickness: .435 inch - Ring Gear Thickness: 11.04 mm - Flywheel Thickness \[mm\]: 1.451 inch - Flywheel Thickness \[mm\]: 36.85 mm - Flywheel Friction Surface Inner diameter: 6.260 inch - Flywheel Friction Surface Inner diameter: 159 mm - Overall Casting O.D.: 11.570 inch - Overall Casting O.D.: 293.89 mm - Dowel hole diameter: .315 inch - Dowel hole diameter: 8 mm - Bolt hole PCD crankshaft: 3.031 inch - Bolt hole PCD crankshaft: 77 mm - I.D. for Pilot: 1.647 inch - I.D. for Pilot: 41.84 mm - Flywheel friction surface outer diameter: 10.039 inch - Flywheel friction surface outer diameter: 255 mm - Ring Gear Chamfer Side: Engine - Ring Gear Chamfer Position 6:00 O´clock: Left - Flywheel Cup Depth or Step Height: .019 inch - Flywheel Cup Depth or Step Height: 0.48 mm - Crank Hole Dia.: .415 inch - Crank Hole Dia.: 10.53 mm - Crank To Friction Surface: 1.762 inch - Crank To Friction Surface: 44.75 mm - Ring Gear Mounting O.D.: 11.032 inch - Ring Gear Mounting O.D.: 280.22 mm - Ring Gear Major Dia.: 12.008 inch - Ring Gear Major Dia.: 305 mm - Flange Thickness: .456 inch - Flange Thickness: 11.58 mm - Bolt Hole Pattern: 14 - Bolt hole PCD clutch pres.plte: 10.827 inch - Bolt hole PCD clutch pres.plte: 275 mm - Has Dowel Pins: with Dowel Pins - Dowel Hole Pattern: 5 **Features:** - Engineered and manufactured to OE specifications - All new components - including ring gear and dowel pins - Perfectly balanced - Precision-machined from premium grade cast iron - Superior quality friction surface - Excellent heat-absorbing capacity - Order from the comfort of your home or office The flywheel is an integral part of a clutch replacement. In today’s tightly packaged clutch systems, flywheels can easily be machined beyond their usable life – a critical flaw that would not be evident until after the clutch is installed. Improper machining can also cause interference, no release and slipping problems. Pairing your LuK RepSet with a new LuK flywheel is a smart, cost-effective alternative to resurfacing. Product Video About Us 