For Toyota 4Runner 1985-1995 LuK LFW207 Single Mass Flywheel
Price:
$96.54
Ships From:
Rockville Centre, New York, US
Clicking on links to merchants on this site may result in this site earning a commission.
LuK conventional flywheels are dynamically balanced to reduce vibration and improve clutch performance. All new – never remanufactured – every flywheel component is engineered and built to original-equipment specifications, including the ring gear and dowel pins. Single Mass Flywheel (LFW207) by LuK®. LuK conventional flywheels are dynamically balanced to reduce vibration and improve clutch performance. All new – never remanufactured – every flywheel component is engineered and built to original-equipment specifications, including the ring gear and dowel pins. **Specifications:** - Bolt Hole Pattern: 20 - Flywheel Friction Surface Inner diameter: 5.787 inch - Flywheel Friction Surface Inner diameter: 147 mm - Flywheel friction surface outer diameter: 9.449 inch - Flywheel friction surface outer diameter: 240 mm - Ring Gear Thickness: .363 inch - Ring Gear Thickness: 9.22 mm - Flange Thickness: .565 inch - Flange Thickness: 14.34 mm - Flywheel Cup Depth or Step Height: .023 inch - Flywheel Cup Depth or Step Height: 0.59 mm - Crank Hole Dia.: .440 inch - Crank Hole Dia.: 11.17 mm - Dowel hole diameter: .313 inch - Dowel hole diameter: 7.96 mm - Bolt hole PCD clutch pres.plte: 10.866 inch - Bolt hole PCD clutch pres.plte: 276 mm - Crank To Friction Surface: 1.515 inch - Crank To Friction Surface: 38.49 mm - Flywheel Thickness \[mm\]: 1.517 inch - Flywheel Thickness \[mm\]: 38.52 mm - Ring Gear Mounting O.D.: 10.257 inch - Ring Gear Mounting O.D.: 260.52 mm - Ring Gear Major Dia.: 11.618 inch - Ring Gear Major Dia.: 295.09 mm - Dowel Hole Pattern: 5 - Centering diameter / dowel hole: 10.866 inch - Centering diameter / dowel hole: 276 mm - I.D. for Pilot: 1.646 inch - I.D. for Pilot: 41.82 mm - Number of teeth, starter ring gear: 115 - Bolt hole PCD crankshaft: 2.468 inch - Bolt hole PCD crankshaft: 62.69 mm - Overall Casting O.D.: 11.500 inch - Overall Casting O.D.: 292.09 mm **Features:** - Engineered and manufactured to OE specifications - All new components - including ring gear and dowel pins - Perfectly balanced - Precision-machined from premium grade cast iron - Superior quality friction surface - Excellent heat-absorbing capacity - Order from the comfort of your home or office The flywheel is an integral part of a clutch replacement. In today’s tightly packaged clutch systems, flywheels can easily be machined beyond their usable life – a critical flaw that would not be evident until after the clutch is installed. Improper machining can also cause interference, no release and slipping problems. Pairing your LuK RepSet with a new LuK flywheel is a smart, cost-effective alternative to resurfacing. Product Video About Us 