For Subaru 152300-2742 SRS Computer Crash Data Erase – 24HR TURNAROUND!

 Seat Belt Repair ?  SRS Module Reset ? When this happens, your airbag control module will store SRS codes and crash data, causing the airbag light to come on. In order for the module to function normally again, you will need to mail it in for a crash data reset. At Seat Belt Masters, we offer an airbag control module reset service to clear all crash data and restore your module back to factory condition. With over 20 years of industry experience, you can count on us to help you clear the SRS light on your dash. Using our proprietary module reset software, we'll ensure that no crash data is left behind and that your module will be as good as new. **Airbag Module Reset Compatible With:** **ALL SUBARU MODELS 1996 and UP** This is an airbag control module crash data reset listing compatible with all Subaru models manufactured from 1996 and up. We're here to help you! **[Compatibility Questions? Use a suitable box and adequate packaging material to help keep your parts secured during shipment. Finally, mail your package over to our repair facility to the address below where we'll receive it, complete repairs within 24 hours, and ship it back to you. **? Also known as an airbag computer, it is in charge of all SRS functions, storing SRS codes, and logging crash data history in the event of an accident. During normal operation, the airbag control module is constantly monitoring data from various sensors and systems throughout the vehicle. Some of this information can include vehicle speed, occupant detection, brake use, deceleration force, seat belt use, and more. As soon as impact is detected, the airbag control module will make a split-second decision on which SRS components to deploy, if any, based on the data it receives. The airbag system on your vehicle is critically important in protecting you and your passengers during an accident. An illuminated airbag light indicates that there is a problem with your airbag system and may disable SRS functions. It is not advisable to operate your vehicle with your airbag light on. All active SRS faults will need to be addressed (e.g. if your seat belt is deployed, it will also need to be sent in for a repair, if your impact sensor is damaged, it will need to be replaced, etc.). Resetting your airbag module will not override existing SRS faults, the codes will return until they are addressed. The best way to determine which SRS codes/faults you have is to scan the vehicle with an OBD2 scan tool. _Check out our FAQ Section to better understand the difference between crash data and SRS codes._ **Depending on the vehicle manufacturer, the airbag control module can go by different names, such as:** \- Supplemental Restraint Unit (SRS Unit) \- Restraint Control Module (RCM) \- Airbag Control Module (ACM) \- Airbag Electronic Crash Unit (Airbag ECU) \- Sensing Diagnostic Module (SDM) \- Sophisticated Airbag Sensor (SAS) \- SRS Control Module (SRSCM) * * * # **Airbag Control Module Location** If you still need to remove the airbag control module from your vehicle but don't know where it's located, this guide can help! Listed below are the top three locations where you may find the airbag control module in your vehicle. There's a good chance that someone has already done it in the past and documented it in a forum post, photo guide, or video tutorial. **Do at your own risk!** We cannot speak to the credibility of these tutorials. When in doubt, we always recommend following the service manual guide on removing the airbag control module. Common industry practice is to always have the battery disconnected when removing/installing SRS components.  Yellow connectors will generally indicate that a component is part of the SRS (Supplemental Restraint System). **Any tampering of the SRS Unit before or after the reset will void our included warranty. We do not work on flooded modules. Modules that are physically damaged (broken connectors, damaged casing, etc.) are subject to a rejection of repairs.** # **Common FAQ's:** # Why should I get my airbag module reset? A new airbag control module can cost you hundreds of dollars, take up to several weeks to come in, and will generally require costly VIN programming. When you reset your original airbag control module with us, you'll be saving yourself a lot of time and money. We offer a 100% Satisfaction Guarantee, 24 hour turnaround, 1-3 day return shipping, and excellent customer support. Why wouldn't you want to use this service! Try us out today and see why customers from all over the country are using Seat Belt Masters! * * * # How long will the entire process take? The entire time frame for our service, start to finish, largely depends on the carrier speed. Most orders we receive are repaired and shipped back in 24hrs; sometimes shipped back the same day. In general, you can expect your parts back 3-7 days from when you ship it to us. Outstanding balances or any other order-related issues can cause a delay. We will do our best to contact you in this case. _A tracking number will be provided for all shipments._ * * * # What's the Difference Between SRS Codes and Crash Data? SRS codes will generally point to active or current SRS faults found in the vehicle. This includes deployed seat belts, damaged sensors, wiring issues, etc. Most of the time, you can see a high/low resistance or open/short circuit description for these components. Crash data is permanent history that gets stored in the airbag control module after an accident. It is encoded in complex format that cannot be cleared or read by ordinary OBD2 scan tools. You may only get a generic description outlining the data as STORED or HISTORY codes. Though it's not always the case, a flashing SRS light is indicative of SRS codes, whereas a solid SRS light is indicative of crash data history. * * * # What is an OPDS or OCS Unit? If you scan your vehicle with an OBD2 scanner, you may come across an OPDS or OCS code.  The OPDS (Occupant Position Detection System) or OCS (Occupant Classification System) generally refers to a sensor, or a series of sensors, located in the front passenger seat. The primary purpose of this system is to detect the presence of a passenger to help determine whether or not to deploy the passenger airbags or seat belts. This is genearlly related into the "Passenger Airbag OFF" indicator light that you may see on your control panel. If you are getting codes for the OPDS/OCS unit, it may need to be re-calibrated. This is generally done with an OBD2 scan tool. * * * # Can you provide me with a receipt for salvage inspection? Chances are, you may have to undergo a salvage inspection with receipts proving all major repairs/replacements. We can provide you with a formal company repair receipt if necessary. Just let us know! # Can I send multiple parts in one box? Yes, of course! Just make sure to package your parts securely to avoid any damages during shipping. **Have Other Questions?  You understand that this is a service, not a product item. You are responsible for mailing your part(s) to our repair facility.  Upon successful delivery of your part(s), we will process your order and begin repairs. Most repairs are completed within 24 hours and shipped back to you via the carrier of our choice. If there are issues with your order or any outstanding balances owed, your order may be delayed. In such an event, we will attempt to notify you to the best of our ability. Any tampering of the airbag control module before or after the reset will void any warranties or guarantees offered by Seat Belt Masters. If you part(s) have been damaged or previously tampered with, they are subject to a refusal of repairs. All repairs and/or resets are carried out by our highly skilled and trained technicians. Each order is backed by our 100% Satisfaction Guarantee. If you are reasonably unsatisfied with our repair services, your order is subject to a refund at our discretion; we exercise fairness and good judgment at Seat Belt Masters. Disclaimer: Working with any SRS (Supplemental Restraint System) components is best left to a trained professional in accordance with original vehicle manufacturer specifications. SRS components are designed to work in concert with various sensors, computers, and other systems in the vehicle. Improper removal, handling, or installation of any SRS components, including airbags, SRS units, impact sensors, or seat belts, can result in property damage, personal injury, and/or even death. As a provider of this service, we assume no responsibility or liability for negligence in the handling of such SRS components. By using our service(s), you agree to not pursue any legal or personal actions demanding a sum that is greater than the monies paid to us for service. You agree to ship your part(s) to us at your own expense and risk. We are not responsible for missing, stolen, damaged, or undelivered packages. Your shipping expense is non-refundable. It is at our discretion to process any partial or full refund for services not exceeding the monies paid to us for service. We are not responsible for any missing items such as bolts, screws, nuts, etc.  All orders are shipped back uninsured. It is your responsibility to request shipping insurance in which you are responsible for paying. Seat Belt Masters is not responsible for any additional costs you may incur in using our services; including diagnostic fees, auto repair shop fees, or any other expenses. The installer is accountable for ensuring that all SRS components are installed correctly and are fully operational. The purchaser of this service agrees to accept all risks associated with the use and/or handling of any SRS components, including the risk of property damage, bodily injury, or death. Newsletter Don't miss any offers! We will inform you about our offers and promotions by email.

• Brand: Subaru
• Type: Airbag Control Module Reset