For Scion xB 2004-2006 LuK Single Mass Flywheel
Price:
$152.5
Ships From:
Rockville Centre, New York, US
Clicking on links to merchants on this site may result in this site earning a commission.
LuK conventional flywheels are dynamically balanced to reduce vibration and improve clutch performance. All new – never remanufactured – every flywheel component is engineered and built to original-equipment specifications, including the ring gear and dowel pins. Single Mass Flywheel by LuK®. LuK conventional flywheels are dynamically balanced to reduce vibration and improve clutch performance. All new – never remanufactured – every flywheel component is engineered and built to original-equipment specifications, including the ring gear and dowel pins. **Specifications:** - Number of teeth, starter ring gear: 106 - Flywheel Cup Depth or Step Height: .026 inch - Flywheel Cup Depth or Step Height: 0.67 mm - Centering diameter / dowel hole: 9.843 inch - Centering diameter / dowel hole: 250 mm - Flywheel Thickness \[mm\]: 1.204 inch - Flywheel Thickness \[mm\]: 30.57 mm - Bolt hole PCD crankshaft: 2.321 inch - Bolt hole PCD crankshaft: 58.95 mm - Crank Hole Dia.: .419 inch - Crank Hole Dia.: 10.65 mm - Dowel hole diameter: .306 inch - Dowel hole diameter: 7.78 mm - Crank To Friction Surface: 1.003 inch - Crank To Friction Surface: 25.48 mm - Dowel Hole Pattern: 5 - Bolt Hole Pattern: 2 - Bolt hole PCD clutch pres.plte: 9.843 inch - Bolt hole PCD clutch pres.plte: 250 mm - Overall Casting O.D.: 10.669 inch - Overall Casting O.D.: 271 mm - I.D. for Pilot: 1.415 inch - I.D. for Pilot: 35.94 mm - Ring Gear Chamfer matches OE: Ring Gear Chamfer matches OE - Ring Gear Chamfer Position 6:00 O´clock: Left - Flywheel friction surface outer diameter: 8.465 inch - Flywheel friction surface outer diameter: 215 mm - Flywheel Friction Surface Inner diameter: 5.394 inch - Flywheel Friction Surface Inner diameter: 137 mm - Flywheel matches Clutch: Flywheel matches Clutch - Ring Gear Mounting O.D.: 9.370 inch - Ring Gear Mounting O.D.: 238 mm - Ring Gear Major Dia.: 10.669 inch - Ring Gear Major Dia.: 271 mm - Ring Gear Chamfer Side: Engine - Ring Gear Thickness: .345 inch - Ring Gear Thickness: 8.76 mm - Flange Thickness: .366 inch - Flange Thickness: 9.29 mm **Features:** - Engineered and manufactured to OE specifications - All new components - including ring gear and dowel pins - Perfectly balanced - Precision-machined from premium grade cast iron - Superior quality friction surface - Excellent heat-absorbing capacity - Order from the comfort of your home or office The flywheel is an integral part of a clutch replacement. In today’s tightly packaged clutch systems, flywheels can easily be machined beyond their usable life – a critical flaw that would not be evident until after the clutch is installed. Improper machining can also cause interference, no release and slipping problems. Pairing your LuK RepSet with a new LuK flywheel is a smart, cost-effective alternative to resurfacing. **Replaces Original (OE) Part #:** 1340521030 Product Video About Us 