For 2021-23 BMW G80 M3 G83 M4 Front Splitter Bumper Lip Spoiler Carbon Look Used

For 2021-23 BMW G80 M3 G83 M4 Front Splitter Bumper Lip Spoiler Carbon Look Used  We appreciate you place an order. If you are satisfied with the item, please take a moment to reward our efforrs by leaving us a POSITIVE FEEDBACK   and perfect "5 STAR"scores. If you intend to leave a  neutral or negative feedback, please contact us firstly, so that we can satisfactorily address your concerns and rectify any issues. **Specifications:** Product Name: G80 M3 G82 G83 M4 Front Splitter Lip Conditions: Used Material: High Quality ABS. Color: CARBON FIBER LOOK Surface: Painted Style: M Performance Style Type: 3-Pieces in 1 Front Splitter Models: 2021-2024 BMW G80 M3 G82 G83 M4 Place Position: Front; Lower; Bumper Lip Package Size: 50.2''\*6.12''\*8.57''(123\*15\*21CM) Package Weight: 4.05kg **Fitment:** For 2021-2024 BMW G80 M3 Sedan Models. For 2021-2024 BMW G82 M4 Coupe G83 M4 Convertible Models. **Package Includes :** 1x Front Splitter Lower Bumper Lip (3PCS/Set) 1x Roll Tape & Some Screws **Installation:** Installation Instruction is not included. Professional Installation Is Highly Recommended. 1\. Inner Side Adhesive 2\. Bottom Punching Installation Methods: a. Comparison position And Clean the location of the installation with rubbing alcohol before proceeding. (make sure to remove any grease, wax or dust etc) b. Please ensure that the product completely fits before proceeding with installation. (Note: if there any questions or if the product does not fit properly, please contact us) c. Remove the high strength double-sided adhesive from the back of the plate. In the case of a relatively low temperature, heat installation location, and plate with a hair dryer or a heat gun on low setting d. Carefully place the product in desired location and press down for about 1-2 minutes, (Note: do not wash your car for 24-hours. The adhesive should be cured after 12-hours) e. If the package contains self-tapping screws, tighten the self-tapping screws in turn.(Some Item Don't Need Hardware) f. The installation is complete. Why Do We Need To Install The Front Bumper Lip Splitter? a.For the appearance of the car to add dynamic，Upgrade the visual experience. b. Reducing the air flow through the bottom of the car can reduce the lifting force caused by the air flow under the car and improve the stability of the car c. Avoid the appearance of bumps and bruises formed after small collisions **Notes:** -We provide clear pictures, measurements where possible. -Please check as much as possible to make sure the item is the one that you need. -Please allow 0.5-1 inch difference due to manual measurement. (1inch=2.54cm) -Instruction is not included. Professional Installation Is Highly Recommended! -The color of the actual items may slightly different from the listing images due to different computer screen, thanks for your understanding.  1\. We Accept Payment Through **Paypal** Only. 2\. (PayPal verified and confirmed address; the account holder must be the receiver). 3\. Please complete your payment within 2 days after the item is won. If you have difficulty completing your payment within the required time, please contact us. Non-Pay Dispute will be filed against your account after the 2th day. 4\. Our price does not include Duties, Value Added Taxes, Customs Clearance Fees, and other charges. These charges are the buyer's responsibility. 5\. The buyer needs to pay for the above fees in case that occurred for certain goods. If the parcel returns back to us due to the buyer refuse to pay those fees, we would not send the parcel again unless the buyer completes those fees and pay all the return and resend cost. The buyer can not cancel the order or request a refund due to this reason.  Free Shipping with FedEx/UPS/USPS to the Mainland 48 states ONLY PO Box, AK/HI/PR and APO/FPO address will not be accepted. Payment cleared/received on Friday will be shipped on the next business days (Monday or Tuesday) Orders are typically shipped in 1-2 business day after payment is completed. Please note we do not ship orders on Saturdays, Sundays, and national holidays. All our items will be shipped to the address you submit, please confirm your address on before you bid or purchase. Shipping time may vary depends on your area. Delivery may be delayed due to extreme weather or special circumstances. Please wait patiently. Import duties, taxes, and charges are not included in the item price or shipping/handling price. These charges are the buyer's responsibility.  All items sold by us are being described to the best of our abilities, as accurate as possible, and with utmost conscientiousness on our part. We stand behind the quality of all of our products. All products are double inspected before stocking and dispatching. However, sometimes mistake may slip by and the product may get damaged during the process of delivery. If such trouble occurs to you, please take a minute to refer to the following instruction. If the package arrives at your location with obvious shipping damage (including broken envelop, empty package and etc), please refuse the shipment. You should state your item ID, item title and what the damage is clearly in your email. And please be advised that digital photos must be attached to the email you send. And please bear in mind that you should contact us within 3 days since the day you receive the package, or it will be your own responsibility to take the lost of the defective item.  **Retail and wholesale products:** Car Grille, Car front bumper lip, Car rear bumper diffuser lip, Car side skirts, Car rear spoiler wing, Car mirror cover cap shell, Car fog lamp grille, Car front hood cover, Car OE replacement parts, etc. **Specifications:** Product Name: G80 M3 G82 G83 M4 Front Splitter Lip Conditions: Used Material: High Quality ABS. Color: CARBON FIBER LOOK Surface: Painted Style: M Performance Style Type: 3-Pieces in 1 Front Splitter Models: 2021-2024 BMW G80 M3 G82 G83 M4 Place Position: Front; Lower; Bumper Lip Package Size: 50.2''\*6.12''\*8.57''(123\*15\*21CM) Package Weight: 4.05kg **Fitment:** For 2021-2024 BMW G80 M3 Sedan Models. For 2021-2024 BMW G82 M4 Coupe G83 M4 Convertible Models. **Package Includes :** 1x Front Splitter Lower Bumper Lip (3PCS/Set) 1x Roll Tape & Some Screws **Installation:** Installation Instruction is not included. Professional Installation Is Highly Recommended. 1\. Inner Side Adhesive 2\. Bottom Punching Installation Methods: a. Comparison position And Clean the location of the installation with rubbing alcohol before proceeding. (make sure to remove any grease, wax or dust etc) b. Please ensure that the product completely fits before proceeding with installation. (Note: if there any questions or if the product does not fit properly, please contact us) c. Remove the high strength double-sided adhesive from the back of the plate. In the case of a relatively low temperature, heat installation location, and plate with a hair dryer or a heat gun on low setting d. Carefully place the product in desired location and press down for about 1-2 minutes, (Note: do not wash your car for 24-hours. The adhesive should be cured after 12-hours) e. If the package contains self-tapping screws, tighten the self-tapping screws in turn.(Some Item Don't Need Hardware) f. The installation is complete. Why Do We Need To Install The Front Bumper Lip Splitter? a.For the appearance of the car to add dynamic，Upgrade the visual experience. b. Reducing the air flow through the bottom of the car can reduce the lifting force caused by the air flow under the car and improve the stability of the car c. Avoid the appearance of bumps and bruises formed after small collisions **Notes:** -We provide clear pictures, measurements where possible. -Please check as much as possible to make sure the item is the one that you need. -Please allow 0.5-1 inch difference due to manual measurement. (1inch=2.54cm) -Instruction is not included. Professional Installation Is Highly Recommended! -The color of the actual items may slightly different from the listing images due to different computer screen, thanks for your understanding. PAYMENT 1\. We Accept Payment Through **Paypal** Only. 2\. (PayPal verified and confirmed address; the account holder must be the receiver). 3\. Please complete your payment within 2 days after the item is won. If you have difficulty completing your payment within the required time, please contact us. Non-Pay Dispute will be filed against your account after the 2th day. 4\. Our price does not include Duties, Value Added Taxes, Customs Clearance Fees, and other charges. These charges are the buyer's responsibility. 5\. The buyer needs to pay for the above fees in case that occurred for certain goods. If the parcel returns back to us due to the buyer refuse to pay those fees, we would not send the parcel again unless the buyer completes those fees and pay all the return and resend cost. The buyer can not cancel the order or request a refund due to this reason. SHIPPING Free Shipping with FedEx/UPS/USPS to the Mainland 48 states ONLY PO Box, AK/HI/PR and APO/FPO address will not be accepted. Payment cleared/received on Friday will be shipped on the next business days (Monday or Tuesday) Orders are typically shipped in 1-2 business day after payment is completed. Please note we do not ship orders on Saturdays, Sundays, and national holidays. All our items will be shipped to the address you submit, please confirm your address on before you bid or purchase. Shipping time may vary depends on your area. Delivery may be delayed due to extreme weather or special circumstances. Please wait patiently. Import duties, taxes, and charges are not included in the item price or shipping/handling price. These charges are the buyer's responsibility. Terms of Sale All items sold by us are being described to the best of our abilities, as accurate as possible, and with utmost conscientiousness on our part. We stand behind the quality of all of our products. All products are double inspected before stocking and dispatching. However, sometimes mistake may slip by and the product may get damaged during the process of delivery. If such trouble occurs to you, please take a minute to refer to the following instruction. If the package arrives at your location with obvious shipping damage (including broken envelop, empty package and etc), please refuse the shipment. You should state your item ID, item title and what the damage is clearly in your email. And please be advised that digital photos must be attached to the email you send. And please bear in mind that you should contact us within 3 days since the day you receive the package, or it will be your own responsibility to take the lost of the defective item. ABOUT US **Retail and wholesale products:** Car Grille, Car front bumper lip, Car rear bumper diffuser lip, Car side skirts, Car rear spoiler wing, Car mirror cover cap shell, Car fog lamp grille, Car front hood cover, Car OE replacement parts, etc. 

• Brand: Unbranded
• Placement on Vehicle: Front, Lower, Front Lower Bumper Lip
• Material: Plastic
• Color: Carbon Fiber Look
• Type: Front Bumper Lip
• Surface Finish: Painted Anti-UV Clear Coating
• Fitment Type: Direct Replacement
• Warranty: 6 Month
• Interchange Part Number: For 2021-2023 G83 M4 Convertible
• Other Part Number: For 2021-2023 BMW G82 M4 Coupe
• Number of Pieces: 1
• Mounting Hardware Included: No
• Bundle Description: M Perforamnce
• Modified Item: Yes
• Modification Description: M Performance Style
• Applicable Regions: Front Lower Bumper Lip
• Package Size: 50.2''*6.12''*8.57''(123*15*21CM)
• Package Weight: 4.05kg
• Package Contains: 3PCS/Set Front Bumper Lip ; Some Screws
• Colour: Carbon Fiber Look
• Style Type: M Performance
• Note 1: Instruction Not Included
• Note 2: Professional Installation Is Highly Recommended
• Fitment 1: For 2021-2022 BMW G80 M3 Sedan Model.
• Fitment 2: For 2021-2022 G82 M4 Coupe G83 M4 Convertible Model.