Extended Converter Bolt Set Shims 6L80 6L90 200-4R 700R4 4L60 4L80 M10 x 25mm 1"
Price:
$19.95
Ships From:
Irvine, California, US
Clicking on links to merchants on this site may result in this site earning a commission.
THIS IS THE TORQUE CONVERTER BOLT SET YOU HAVE BEEN LOOKING FOR!!! Most bolts on the market like OEM or ARP 230-7304 are 0.590"/15mm and are TOO SHORT. This risks weak or improper thread engagement and/or stripping the threads on the converter. Longer M10x1.5 x 25mm (High strength Grade 10.9) for your performance high-stall converter gives you full thread engagement (0.984" underhead length, approx 1" inch) And most importantly...made right here in the good ol' Stars and Stripes USA! BONUS! Includes three mil-spec shims (approx 0.060" each) if you need to space your converter/flexplate. General rule of thumb is between 0.060" to 0.185" spacing off of the pump, but you will need to investigate this spec yourself. NOTE: These are obviously for custom applications so you are responsible for your own fitment. Be sure these are not too long and that they do not bottom out and damage your front converter cover! Also be sure to use a good liquid threadlocker (i.e. Loctite), not the pre-applied type that you see on many bolts. Fits 10mm x 1.5 threaded converters (i.e. Hughes, Circle D, Yank, TCI, B&M, Precision, Edge, Monster, Level 10, PTC, Banks, etc.) 700R4 4L60 4L80 6L80 6L80 8L90 etc. No returns, no exchanges. Sold as-pictured, as-is.
- Output Shaft Diameter: 1 in
- Brand: Unbranded
- Interchange Part Number: 230-7304
- Country of Origin: United States
- Performance Part: Yes
