Early Blizzard 810PP Lift Cylinder 60027 PowerHitch Snow Plow 12 hoses 7/16 port
Price:
$125
Ships From:
Williamsport, Pennsylvania, US
Clicking on links to merchants on this site may result in this site earning a commission.
Here is a used lift cylinder from an early Blizzard PowerHitch 810PP (Power Plow). Blizzard part number 60027. This cylinder will only work on an early Blizzard Power Hitch 1 810PP that had 12 total hoses and 4 hoses going to each wing (8 total wing hoses-4 to each wing). The newer 810PP had only 2 hoses going to each wing. This cylinder will **not** work on an 810 that only have 2 hoses going to each wing. This came off an early 810 plow, from somewhere around 2002 or 2003. Cylinder came from a fully functioning 810 plow. Cylinder is rough cosmetically, but the chrome for the full stroke of the cylinder is in nice shape, I did not see any pitting in stroke of the cylinder. This is a double acting cylinder with two 7/16" ports. The newer 810PP use a very similar lift cylinder, but with two 9/16" ports. This cylinder is what controls the latch arm assembly to mount and dismount the plow from the vehicle, and to raise and lower the plow on the vehicle. There are marks/rust on the chrome of the rod that is not part of the cylinder stroke-in other words, the pitting in the chrome on the rod is not going past the seals. There is always about 8.5" of the chrome rod sticking out the end of the housing on this cylinder. The end of the rod broke off at some point and was welded back on. Weld looks good. Cylinder does have rust in places on the housing where the powdercoat is missing. Cylinder is 18" from center to center of the mounting holes when the cylinder is fully retracted. Cylinder is 19.5" long end to end when fully retracted with 3/4" mounting holes. Chrome rod is 1 1/4" in diameter. Black housing is 10 7/8" long. This cylinder will only work on PowerHitch 1 plow (the lights can stay on the truck when the plow is disconnected from the truck). **These will not work on a PowerHitch 2 plow (lights stay on the plow when plow is disconnected from the truck).** If you are unsure if this will work for your plow, ask me before buying. You will be receiving what you see in the pictures. Thanks for looking. Check out my other listings for more plow parts. Free shipping to US only. Return Policy: Please email me with any questions before purchasing the item. Buyer is responsible to independently confirm fitment before ordering. Buyer needs to do their own research before buying. No returns, refunds, or exchanges for parts that have been purchased incorrectly.
- Brand: Blizzard
- Manufacturer Part Number: 60027
