CORVETTE, GTO, CHEVY, PONTIAC 64-71 Transistor Ign AMP: Restore Service
Price:
$500
Ships From:
Albuquerque, New Mexico, US
Clicking on links to merchants on this site may result in this site earning a commission.
Up for Sale is an **_Exchange yours for a Restored unit_** _**OR restoration service of your core**:_of a **K-66 Transistorized Ignition Amplifier**, correct for **Corvettes** (and other GM models including Chevelle, Nova, Camaro, Impala, Biscayne, GTO, Pontiac, etc. & Marine) 1964 through 1971 models optioned with K66 Transistorized Ignition. This listing is not for Pontiac/Olds UHV amps-see our other listing for them. **We start with a nice original core, then strip it down to bare metal, paint per original design drawing to get paint where it should be, but not where it was not called for. We install a NEW Delco reproduction module (see our other listing for all the benefits over an OEM module), and finally the finishing touch of a new decal.** The K-66 ignition was a big part of GM's racing success in the mid 60's & 70's, and work great on all high performance optioned GM cars. These are original OEM units (part #1115005, #1115343, #1115007, #1115008 & perhaps other P/Ns). You can pick THREE options: 1) 1st Design #1115005: plug-in connector at housing, has backing plate that cups over the sides of the housing & "poured-in" gasket. Used 64-February 67 (design blueprint date change). 2) 2nd Design #1115005: plug-in connector at housing (started about April 67 & used until February 1968), has flat backing plate & full rubber gasket, which were used 2/67-71. 3) #1115343: has "pigtail" extension w/connector about 26" long. Used 2/68 (design blueprint date)-71. 4) #11115007/008 65-66 GTO (64 GTO used the #11115005) _The above units will have NEW Delco licensed reproduction modules/boards, that have **up-graded Silicon Transistors**_ (impervious to heat & vibration that kills the OEM germanium transistors), and meticulously restored cosmetically to "original" and are now in _Show Condition ($475 exchange for a like model P/N & type connector & like type backing plate). If you need a different P/N than your core= add $75. If you need a different backing plate than your core has= add $75. If your extension harness needs re-wrapping/repairs= add $50-75._**_**_This_** _Sale is an__ _exchange basis or restore yours service._** __For immediate shipping we can charge for the core__ __charge/value $400-$500 for an amp core, then refund when we receive your complete__ __re-buildable (no broken mounting ears=unacceptable) similar core (missing__ __parts, incorrect/different P/N, backing plate, etc.=reduced core value), or you can ship your core and payment without__ __core charge-once received, we shipped the restored unit.___**Do-it Yourself**_: If you prefer to do the work yourself, we offer the latest Delco licensed reproduction module (with modern electronics): we are a Dealer of this line and have these modules in stock and listed in our e-bay store separately. Restored backing plates available separately= $75 _Exchange for same design + $85 for different_. Decals= $15. These prices are the same if you want to exchange **_or you send us your Amp to restore,_** with guaranteed return of your Amp/housing. Note: We guarantee our products for one year: the Delco factory does not guarantee the reproduction units to us or any of their Dealers; however, we feel so strongly about their new module/board, we will guarantee them also for one year, if we install them as part of the restoration of the Amp. Unlike other restorers, our amp housings have paint with the correct gloss where it should be and no paint where it should not be (based on copies of original blueprints from Delco Remy, and inspection of several original units), and they are _**guaranteed to work**_-they are tested on one of our running TI equipped cars. _**If you do not have a core**_, we have some _restored_ _units_ to sell outright (core value added): price is based on year/part # & availability (check for availability). We also have a few _NOS units_. Some NOS units are close, but not 100% correct to OEM original configuration, depending on manufacture date (we can explain the differences). **Further, we also carry the latest/best available reproduction unit (#11115005 & #11115343 only), from the only Delco authorized reproduction distributor (we are a Dealer) with contemporary module electronics; which are close in appearance** **to OEM.****, but not 100% correct and will most likely have minimal point deductions.****Important Note:** do not confuse these OEM restored units and Delco reproductions with other aftermarket modules, some of which are not the same electronics-we carry the best one out there. The "Other Brand" aftermarket units; we find, are harder starting, don't run quite as well and some do not use one wire lead (for full 12v at cranking) that the originals used (Judges know this and will deduct points)--Most importantly, they are not guaranteed and once you take it out of the box/plastic bag-it's yours, no returns. **Feel free to ask questions-see last picture.**
- Manufacturer Warranty: 1 Month
- OE/OEM Part Number: 1115005, 1115343
- Country/Region of Manufacture: United States
- Placement on Vehicle: Front
- Manufacturer Part Number: 1115005, 1115343
- Brand: Delco Remy
- Part Brand: 1115005, 1115343
- Type: Ignition Kit
- Items Included: Instructions
