ChieF PRO-grammable Joystick board FISHER WESTERN snow plow controller 56369 B

**DON'T WASTE $110 PLUS !! To get a controller rebuilt when all you actually get is a repair on the board ! or even worse, buy a $180 COPY of the factory boards that is made worse than the originals** **Even** **if you did get a fully rebuilt board like I do where all the parts get** **replaced, you will still have an inferior base factory board** **This is a Custom Built UPGRADE controller BOARD for the Western or Fisher classic joystick model,** with the small rectangular 6 pin white plug THIS CAN BE PROGRAMMED by you to your liking to work like the original joysticks OR like a handheld OR 1/2 and 1/2. The up and down can also be reversed. **On the left and right: you can choose conventional hard stop movements like the original joysticks or the softer stop movements like a handheld has.** **On the Down: you can make it drop and go into float instantly or you can set it so that you can tap the lever for partial down and or hold it 1/2 second to get float. Their is a float light to show when float is on.** **The UP and Down can also be reversed if you like.** **These use solid state transistors that are internally short circuit protected and overload protected . These transistors switch power to the solenoids so there is virtually no power going through the switches** **The switches are also waterproof** **All 4 circuits out to the solenoids are fuse protected with SELF-RESETTING fuses** **includes glow-stick feature that would look like picture 4 (the controller in that picture is not part of this sale)** **These are also available with full size switches but they are not waterproof (picture 6)** **or with unpluggable cord (picture 7)** **or with the remote option like in (picture 8)** **These can also be used for an old Meyer 6 pin, or a Snowdogg straight blade with an optional plug adapter** **actually MADE in the USA ! Glen Spey, NY** includes a 3 year repair warranty **If you have any function issues after the sale, email me !! my info will be in the package** **Usually the problem it is a bad ground issue. The old joystick controllers can mostly function with a bad or no ground. These will not.** **Similar board pictured** **Includes a new led bulb cover, dust ring and rubber or plastic handle, plus** If you are not sure if it is your controller and want to check the plow with jumper wires, ASK.

• Country of Origin: United States
• Brand: ChieF
• Other Part Number: 56369 8334 56376 49283
• Interchange Part Number: 8334, 56369, 56376, 49283
• Warranty: 3 Year
• Number of Pieces: 1
• Fitment Type: Performance/Custom
• Manufacturer Part Number: 56369c
• Superseded Part Number: 56369
• Part Type: pcb