Boss RT3 Wiring Harness Ford 99-04 F250 F350 HB5 Snow Plow 13 pin Harness

_**\*\*\*If your plow would have the new Boss SL3 LED plow lights, this harness will not work with the LED lights.\*\*\***_ Here is a set of wiring for a Boss RT3 straight blade and v-plow. It has the 9 pin plug for the handheld controller. This wiring has the 13 pin rubber plug that connects to the plow harness.  This is the 4 relay harness used on 08 and newer trucks, but will work on trucks older than 08 as well. This is the original version of the MSC04316 harness without sealed relays (all 4 relays are brand new on this harness). If you would be using this harness with SL2 halogen headlights, this harness would not support the dual burn feature (running both high and low beam at the same time) without an additonal MSC08050 dual burn relay kit that would have to be purchased separately. This wiring is for vehicles with HB5 headlight bulbs. This harness is in good shape. Check to make sure your vehicle has HB5 headlight bulbs. _**If your vehicle does not have HB5 bulbs, this harness will not work for your truck as it is even if your truck is one of the trucks listed below. Other headlight adapters can be purchased separately to use this harness with other trucks.**_ The following list of trucks will work with this harness as it is: 99-04 Ford Superduty trucks.  The headlight adapters in this harness are only for trucks with dual headlights. If your truck has quad headlights, these adapters will not be the right ones for your truck. This wiring is in nice shape, but you better have a manual and wiring diagram if you plan to install it yourself. You may have to put on a new end to attach the wiring to the fuse (inexpenisve and easy to do). This is the plow control harness and the plow light harness. Harness was gone over and bad connections were replaced and wires tested.  **BEFORE BUYING** check with a Boss dealer if you will need different headlight adapters for your truck or use the product selector from Boss's website to confirm that this is the right harness for your truck and plow. The headlight adapters are vehicle specific (because vehicles use different headlight bulbs). This wiring was taken off a used truck because they no longer wanted the plow on the truck. Included is the plow harness and headlight harness (MSC04316), light switch (MSC04747), battery cables (HYD01684) and solenoid (HYD01633) (what you see in the pictures). Solenoid is new.   You are buying this harness as is. Thanks for looking. Check out my other listings for more plow and spreader parts. Free shipping to 48 continental US states. Return Policy: Please email me with any questions before purchasing the item. Buyer is responsible to independently confirm fitment before ordering. Buyer needs to do their own research before buying. No returns, refunds, or exchanges for parts that have been purchased incorrectly.

• Brand: Boss
• Manufacturer Part Number: MSC04316