Boss RT3 Wiring Harness 13-14 Dodge Ram 2500 3500 9005/HIR2 Snow Plow 13 pin

_**\*\*\*If your plow would have the new Boss SL3 LED plow lights, additional harnesses would be required.**_ Here is a set of wiring for a Boss RT3 straight blade and v-plow. It has the 9 pin plug for the handheld controller. This wiring has the 13 pin rubber plug that connects to the plow harness. This is the newer style harness with the 4 sealed relay pack (this harness is missing the cover for the relay pack).  This is the 4 relay harness used on 08 and newer trucks, but will work on trucks older than 08 as well. This wiring is for vehicles with 9005 High Beam and HIR2 low beam headlight bulbs. This harness is in good shape. Check to make sure your vehicle has 9005/HIR2 headlight bulbs. _**If your vehicle does not have 9005/HIR2 bulbs, this harness will not work for your truck even if your truck is one of the trucks listed below.**_ The following list of trucks will work with this harness as it is: 13-14 Dodge Ram 2500, 3500 trucks. This wiring is in nice shape, but you better have a manual and wiring diagram if you plan to install it yourself. Harness was gone through and wires were tested. Connectors that needed replaced due to damage or corrosion were replaced. Some headlight adapters were replaced by splicing in replacement headlight adapter plugs. Splices were soldered and then the connection was covered with an adhesive lined heat shrink to seal the connection. You may have to put on a new end to attach the wiring to the fuse (inexpenisve and easy to do). This is the plow control harness and the plow light harness. **BEFORE BUYING** check with a Boss dealer if you will need different headlight adapters for your truck or use the product selector from Boss's website to confirm that this is the right harness for your truck and plow. The headlight adapters are vehicle specific (because vehicles use different headlight bulbs). This wiring was taken off a used truck because they no longer wanted the plow on the truck. Included is the plow harness and headlight harness (MSC04316-no cover on for the relay pack), headlight adapter kit (MSC09346), battery cables (HYD01684) and solenoid (HYD01633) (what you see in the pictures). No headlight switch (MSC04747) is included. Boss would list MSC25000 as the wiring kit that is needed with their product selector on their website. MSC25000 contains MSC04316, HYD01684, HYD01633, and other parts. You are buying this harness as is. Thanks for looking. Check out my other listings for more plow and spreader parts. Free shipping to 48 continental US states. Return Policy: Please email me with any questions before purchasing the item. Buyer is responsible to independently confirm fitment before ordering. Buyer needs to do their own research before buying. No returns, refunds, or exchanges for parts that have been purchased incorrectly.

• Brand: Boss
• Other Part Number: MSC25000
• Manufacturer Part Number: MSC04316 MSC09346 HYD01684 HYD01633