BMW MS43 M54B30 3.0 ECU DME E39 530i E53 X5 3.0 PNP EWS Disabled - Factory Tune

BMW Standalone MS43 for the M54B30 3.0 engine. This ECU DME has EWS Off / Disabled Immobilizer. **Note - Factory emissions , no changes.** If you want your VIN coded that’s not a problem, include your VIN in the notes when ordering, no extra cost. If you don’t specify your vin a random one will be used. **This engine computer is for the 3.0 liter M54B30 engine as used in the 330i 330ci 330ix e46 3 series and e39 5 series 530i and e53 x5 3.0** **This dme works for automatic and manual transmission or if you are doing an engine swap into another chassis such as E30 / E36.** - **Make sure your car is using MS43 dme, as opposed to MS45, look at the dme in the car , takes a few minutes .** - **Again - confirm your car has MS43 dme before purchasing, by purchasing you are agreeing that you’ve done your due diligence- no returns are accepted. Each dme is tested and working, I am not responsible if you purchase a wrong dme without checking first .** **It is recommended that when you swap / install a DME you reset adaptations using INPA or similar tool. I reset adaptations using BMW inpa tool when I test these before shipping. Check your OBD2 scanner for instructions or ask your local BMW mechanic to perform this simple task , takes less than a minute to do.** Note - if you also need a modified EWS module look at my other listing . Modified ews module is needed in some cases when your key for example is bad, or you can bypass the module by splicing the two starter wires going to/from it, it’s pretty simple . You can Google instructions or check on bmw forums if you don’t know how . **Make sure your car is using MS43 dme before purchasing, as opposed to MS42 or MS45! One way to tell is to take a look at your MAF connector , if you have a 5 pin connector then your car will NOT have an MS43 dme and this will not work for you.** **Or simply remove the dme cover under the hood on driver side and confirm the dme shows MS43 on its label.** Condition is Remanufactured, tested working DME with EWS deleted. Adaptations are reset using INPA, then road tested in 2002 E46 manual transmission car and checked that there are no codes. DME is updated via BMW WinKPF tool, version 66 . This is not some generic publicly available old version . This is a good updated 066 version, not some old generic old version found online. **Note - EWS check in this DME is off, nothing else is deleted or disabled .** **Again- The only thing disabled or turned off is EWS security system. This allows you to plug the dme in and use it as plug and play dme, or if you are doing an engine swap.** Note - if your car is having ews 🔑 issues and you still have the ews module under steering column , you may need to also bypass it in order for the car to crank if your key is dead. The DME and EWS module / key work together , so if your car has bad or fauly ews module and/or key you’ll need more than just this DME!!! Fast shipping via USPS priority mail , with tracking . DME is programmed , tested , packaged and ready to ship. Working as it should . **Ensure your car has MS43 dme as pictured and is a 3.0 liter version before purchasing , no returns or exchanges!** USA Based Seller, ships quickly via USPS Priority Mail with tracking , usually same business day shipping ! **Sold as is , no warranty or returns, tested and guaranteed to not be DOA. Do not purchase this Dme to troubleshoot your car , every Dme is marked and photographed in detail to prevent scams.** Fast shipped via usps priority mail with tracking. Thank you and have a great 👍 day! Check my reviews, I am long time BMW enthusiast and owner, each dme is road tested in my own vehicle to ensure it works. Cheers!

• Brand: Siemens
• Manufacturer Warranty: No Warranty
• Manufacturer Part Number: MS43
• Country/Region of Manufacture: Germany