BMW E21 250mm Rear Drum Brake Backing Plates + Hardware for E10 2002 Upgrade #2
Price:
$269
Ships From:
Bonita, California, US
Clicking on links to merchants on this site may result in this site earning a commission.
**E21 320i Rear Brake Backing Plates + Hardware** This pair of 250mm rear brake backing plates and hardware were removed from an E21 320i. Fits all E21 models except 323i, and E10 2002 models for those wanting to upgrade their rear braking power. The listing includes the left and right backing plates, 4 springs, thrust rods, and 4 retaining pins and clips. To complete the full brake package, you will need 2 drums, 2 wheel cylinders, and a set of brake shoes. The backing plates are no longer available from BMW. The parts are in good used condition. No rust. Adjusters rotate. Adjusting hexes show a little bit of wear but are functional. See the calculator for the shipping cost. From Aardvarc Racing's website: This 250mm rear brake upgrade kit, when used Aardvarc Racing's vented rotor front upgrades gives a very nice brake balance right out of the box. It offers a substantial increase in braking over the stock 230mm drums. Includes good used E21 backing plates (powder-coated semi-gloss black), and new drums, cylinders, shoes, springs, and all brake hardware. This is a simple bolt-on upgrade. you will need to trim the parking brake cable tube by approximately 1 cm where it exists the body to allow for proper parking brake lever angle when activated.
- Country of Origin: Germany
- Brand: BMW
- Type: Brake Drum
- Manufacturer Part Number: 34211120045, 34211120046
- Material: Steel
- Placement on Vehicle: Rear
