Aisle2 1932 1933 Dodge Plymouth Chrysler Desoto brake drum RHT Mopar 05636

Hello guys, we have what is believed to be a 33 Dodge Plymouth rear brake drum with right hand threads (RHT), thread pitch is 1/2-20 and the lug pattern is 5 on 4 1/2. I chased the threads myself to ensure that the threads are in good condition which they are. If you want to use it for the front or the other side of the axle you can remove this drum from the hub and just grind the rivets off and use it on your other application. This is a solid drum that you can use, but you will need to clean the taper for the axle and also wire brush the inside where the brake lining goes. It is a 10 inch drum and the shoe width is 1 7/8 or around 2 inch. Naturally for a concours car you'll want to powder coat this or chrome plate it but if you're like me and you just want it to work you're just going to clean it up and use it. It is rusty inside but it is a solid drum and this is why I posted it as for parts not working. You may want to turn the drum too but I think you can just match your brake shoes to the drum and you will be OK. I noticed what I thought was a part number on the edge of the brake drum but when I searched my 16th edition of Hollander I could not find any numbers for it. I did have to double check because I thought the last number was an eight and it is a six. Please contact me if you know which reference book would accommodate this part number.I gotta say before you finish looking at this post consider making an offer. Most of my sales are from buyers offering a price they are willing to pay. I have gone as low as 40% off. It just depends on the item. This is a used item. Please look at photos carefully. These photos are of the actual item and they are part of the description. All sales are Final. There are no partial refunds. Please read the description and make sure this item is for you. Buyer agrees to these terms. 48 states only. -Buyers please note- I ship on Tuesdays. Thanks for looking

• Brand: Dodge
• Type: Brake Drum