AC Compressor Kit Fits Mitsubishi Outlander 2014-2020 OEM QS90 KT491-1

**OUR PRODUCT** You are purchasing a new compressor with clutch. **SEE COMPATIBILITY** We would appreciate if you could leave us a note with the vehicle specification (Year, Make, Model and Engine) in PayPal when making the payment, in that way we can reassure that the a/c compressor will fit properly. If your are unsure what a/c compressor would fit in your vehicle, please do not hesitate to contact us by email **THE SYSTEM (COMPRESSOR INSTALLATION)** **1 Year A/C Warranty****& Agreement** Follow all local, state and federal regulations when servicing mobile A/C systems and read this instruction sheet prior to starting any repairs. Oil charges and oil types should be closely adhered to for proper A/C performance. If you are uncertain of OIL CHARGE OR REFRIGERANT TOTAL SYSTEM CHARGE refer to the under hood decal or, OEM service manual. **USE ONLY R-12 OR R-134a REFRIGERANT.** **1\.** Remove compressor, receiver drier or accumulator, orifice tube or expansion valve. **2\.** Flush the condenser and evaporator using **NON-OIL BASED** A/C flush. On expansion valve systems THE VALVE MUST BE REMOVED before the evaporator can be flushed.  **FLUSHED CONDENSERS FROM OUTLET TO INLET AND EVAPORATORS FROM INLET TO OUTLET.** **WARNING: NEWER STYLE CONDENSER DESIGNS ARE VERY HARD, IF NO IMPOSSIBLE TO FLUSH. IT IS SUGGESTED THAT IF THE COMPRESSOR HAS A MAJOR FAILURE THE CONDENSER SHOULD BE REPLACED.** **3\.** Drain all the oil from the new compressor and dispose of according to local, state and federal laws. **NOTE:** if you compressor has a drain plug you will need to open it up and drain what  oil is in there too, **4.**   Install half oil charge into the compressor and the remainder throughout the system. Turn compressor shaft 8-10 full revolutions to insure front seal and other internal parts are lubricated. **5.**   Install new receiver drier or accumulator and new orifice tube or expansion valve. **6.**   Evacuate the A/C system for a minimum of one hour. **7.**   After evacuation install half the refrigerant charge and let the system set for 1 minute. This will allow the refrigerant to pick up oil and spread more evenly throughout the system. **8.**   Start engine whit A/C controls on MAX AIR with door and windows open. **9.**   Add the remaining charge of refrigerant as called for by the manufacture. **RETURN POLICY** **All returns within 30 days will be subject to 20% restocking fee.** **Any warranty after 30 days, customer must pay all shipping charge.** **All returns must be pre- approved.** **Item must be new, resalable condition and in original box.** **SHIPPING** Free ground shipping to the continental US Shipment to Alaska, Hawaii, Puerto Rico, Virgin Island and Guam do not qualify for free shipping, shipping is $35 to these locations (USPS Only) **YOUR SATISFACTION IS OUR MAIN GOAL**

• Pulley Belt Type: Multi-Groove Serpentine
• Manufacturer Part Number: KT491-1
• Oil Type: Pag 46
• Superseded Part Number: 255321, 2022153, 140802, C2158
• Refrigerant Type: R134
• Placement on Vehicle: Front
• Brand: GEGOCOMP
• Type: A/C Compressor
• Interchange Part Number: CO 29091C, 97491, 98491, 168486, 638938
• OE/OEM Part Number: 7813A212, 7813A229, 7813A350, 7813A365, 7813A402, 7813A418, 7813A419, 7813A618, 7813A622, 7813A835, 7813A857, 7813A871, AKS200A402C, AKS200A413H
• Manufacturer Warranty: 1 Year
• Country of Origin: United States
• Pulley Groove Quantity: 3.8906" 6 Groove