AC Compressor & Condenser Kit Fits Honda Odyssey 2005-2007 OEM 10S20C

**OUR PRODUCT** **Kit includes New Compressor, New Condenser CN 3246PFC or CN-1833,****New Rear Expansion Valve EX 10234C,****New Front Expansion Valve EX 10235C** **, Pag 46 Oil & O-Ring Set.** **SEE COMPATIBILITY** We would appreciate if you could leave us a note with the vehicle specification (Year, Make, Model and Engine) in PayPal when making the payment, in that way we can reassure that the a/c compressor will fit properly. If your are unsure what a/c compressor would fit in your vehicle, please do not hesitate to contact us by email **WARRANTY AND COMPRESSOR INSTALLATION GUIDE** **1 Year A/C Warranty****& Agreement** Follow all local, state and federal regulations when servicing mobile A/C systems and read this instruction prior to starting any repairs. Oil charges and oil types should be closely adhered to for proper A/C performance. If you are uncertain of OIL CHARGE OR REFRIGERANT TOTAL SYSTEM CHARGE refer to the under hood decal or, OEM service manual. **USE ONLY R-12 OR R-134a REFRIGERANT.** **1\.** Remove compressor, receiver drier or accumulator, orifice tube or expansion valve. **2\.** Flush the condenser and evaporator using **NON-OIL BASED** A/C flush. On expansion valve systems THE VALVE MUST BE REMOVED before the evaporator can be flushed.  **FLUSHED CONDENSERS FROM OUTLET TO INLET AND EVAPORATORS FROM INLET TO OUTLET.** **WARNING: NEWER STYLE CONDENSER DESIGNS ARE VERY HARD, IF NO IMPOSSIBLE TO FLUSH. IT IS SUGGESTED THAT IF THE COMPRESSOR HAS A MAJOR FAILURE THE CONDENSER SHOULD BE REPLACED.** **3\.** Drain all the oil from the new compressor and dispose of according to local, state and federal laws. **NOTE:** if you compressor has a drain plug you will need to open it up and drain what  oil is in there too, **4.**   Install half oil charge into the compressor and the remainder throughout the system. Turn compressor shaft 8-10 full revolutions to insure front seal and other internal parts are lubricated. **5.**   Install new receiver drier or accumulator and new orifice tube or expansion valve. **6.**   Evacuate the A/C system for a minimum of one hour. **7.**   After evacuation install half the refrigerant charge and let the system set for 1 minute. This will allow the refrigerant to pick up oil and spread more evenly throughout the system. **8.**   Start engine whit A/C controls on MAX AIR with door and windows open. **9.**   Add the remaining charge of refrigerant as called for by the manufacture. **RETURN POLICY** **All returns within 30 days will be subject to 20% restocking fee.** **Any warranty after 30 days, customer must pay all shipping charge.** **All returns must be pre- approved.** **Item must be new, resalable condition and in original box.** **SHIPPING** Free ground shipping to the continental US Shipment to Alaska, Hawaii, Puerto Rico, Virgin Island and Guam do not qualify for free shipping, shipping is $35 to these locations (USPS Only) **YOUR SATISFACTION IS OUR MAIN GOAL**

• Country of Origin: United States
• Manufacturer Part Number: CO 10736C, EX 10234C, EX 10235C, CN 3246PFC
• Pulley Groove Quantity: 6
• Superseded Part Number: 4710535, 4711001, 4711535, 4711537, 4711562, 4711628, 4711629, 4711630
• OE/OEM Part Number: 38810RGLA01
• Clutch Diameter: 5.3125" 6 Groove
• Refrigerant Type: R134
• Oil Type: Pag 46
• Compressor Type: Nippondenso
• Interchange Part Number: 38810RCAA01, 38810RDAA01, 38810RDJA01, 38810RGLA01, CO 10736C, 2011310R, 10000665, 0610098, 639322, 97327
• Brand: GEGOCOMP
• Manufacturer Warranty: 1 Year
• Type: A/C Compressor