98 99 00 01 FORD RANGER 2.5L ENGINE MOTOR ASSEMBLY VIN C, 8th digit, 4-153

DONOR VEHICLE IS A 1999 FORD RANGER 2.5L (VIN C, 8th digit, 4-153), IT FITS 1998 1999 2000 2001 FORD RANGER 2.5L (VIN C, 8th digit, 4-153). FREIGHT SHIPPING TO A BUSINESS/ COMMERCIAL ADDRESS OR FREIGHT TERMINAL PICKUP. FREIGHT COMPANY CHARGES A LIFTGATE FEE OF $75 FOR COMMERCIAL ADDRESS WITHOUT FORKLIFT OR LOADING DOCK, LET US KNOW IF LIFTGATE WILL BE NEEDED. Flat rate freight does not include HI, AK and PR so if you are buying from these locations call or txt me for freight quote first 15756504609. **PRODUCT INFORMATION** **AND PAYMENT AGREEMENT:** The buyer hereby acknowledges that due to the nature of used auto parts, the product(s) listed are sold as described to the best of our knowledge, and IWC make no representation, certification nor warranty regarding mileage and its accuracy. You acknowledge that you have done your research about the product(s), and you have received all the information you requested from us prior to placing your order. You acknowledge that you are buying a used product and you have full knowledge of the potential for personal injury and property damage that might result from it. You further acknowledge and agree that IWC shall have no liability whatsoever for any consequences or incidental damages. While the merchandise of IWC is in the possession of the purchaser, under no circumstance may a “STOP PAYMENT” or “CHARGEBACK” be placed on the transaction. Only once the merchandise has been returned to our establishment may a credit be issued to the rightful cardholder. **WARRANTY AND** **WARRANTY CLAIMS** Buyer acknowledges that due to the nature of used auto parts, liability of IWC from all causes shall be limited to the price paid for the goods sold or provided. If a part IWC sold with a warranty fails to work during the stated warranty period, liability shall be limited to the replacement of the part or a remedy not to exceed the price IWC received for the part. Warranty does NOT cover labor, diagnostic, towing or rental car costs **ALL WARRANTIES** **SHALL BE NULL AND VOID IF:** The part IS TAMPERED WITH, DISASSEMBLED OR MODIFIED without written authorization The recipient vehicle is converted from a private passenger use to commercial or fleet use, or is used for racing or other competition or off-road recreational purposes. The part’s failure is caused by abuse, misuse, or modifications. The part’s failure is caused by using the part for any use other than what was intended or recommended by the manufacturer. The part fails or becomes defective due to the vehicle being involved in a collision. The part is installed or operated outside the United States. We do not offer or cover any labor/installation or additional part charges obtained for any reason The below installation checklist is not followed accordingly. IWC is not responsible for injury or damage during or as a result of the installation of our parts. All damage claims must be made within three days of receipt. Retain all packing materials and shipping documents to help us investigate the cause of the damage. **RECOMMENDED INSTALLATION** **CHECKLIST FROM INDUSTRY LEADER (LKQ):** **ENGINE** Determine why the original engine failure occurred and make appropriate repairs BEFORE INSTALLING A NEW ENGINE. Ensure this engine you are purchasing is the same application as the one being replaced. Clear all computer diagnostic codes from the vehicle prior to installing. Exchange the oil pan and pick-up tube. Inspect and replace gaskets & seals (front seal, rear main seal, valve cover gaskets, oil pan gaskets). All crankshaft bolts that are drilled through sealant must be applied to avoid leaks. Install new thermostat & gasket (warranty will be void if engine heat tab is melted or removed) Replace the timing belt and water pump and Install replacement sparkplugs & wires. Exchange attached accessory items to insure proper fit (mounts, intake manifold, exhaust manifold, distributor, sensors). Disable fuel/ignition before attempting to start engine. This will allow the oil to prime as indicated by the manufacturer. Replace engine oil, oil filter, air filter, fuel filters, coolant-antifreeze. Drain excess oil and coolant from exhaust system. If equipped with an engine oil cooler the radiator or external cooler must be replaced. Ensure the cooling system is flushed and functioning properly. **TRANSMISSION** Determine why the original transmission failure occurred and make appropriate repairs Ensure the purchased transmission is materially the same as the one to be replaced Remove oil pan and replace filter, remove torque converter strap and replace front seal. Properly install and index the torque converter completely into the front pump. Inspect and replace rear seal as needed, and change over sensors as needed. Flush the transmission cooler lines and radiator with a power flush machine or with an aerosol 'Cooler Flush Kit'. This will ensure the cooling system is flowing. Replace the radiator or cooler if recommended by the manufacturer. Clear all transmission computer codes in the vehicle prior to starting or operating. Fill the transmission with the OEM recommended fluids. Verify the differential portion of the transmission is full of fluid. Most 4WD & some 2WD vehicles must re-learn the shift logic to the transmission after installation. You may verify with your local dealer if a re-learn is required for your vehicle. Service is not reimbursable. **RETURN POLICY** Unit must be returned in the same condition it was shipped, complete & whole as shipped without missing parts, within the specified duration (30 or 60 days) on the listing. Final sale items (20% or more), are not eligible for return. Buyer pays for return shipping; restocking & shipping fees may apply. **MORE PRODUCT** **INFORMATION** The ENGINE OR TRANSMISSION you will be receiving from us may or may NOT include some additional accessories and extra parts. If included, these parts are sold AS-IS with NO WARRANTY and were included to help protect the engine during storage and shipping. Examples of these non-warranty parts include switches, sensors, cables, coils, wires, injectors, electronics, belts (including timing belt/chain), hoses, water pumps, brackets, intake/exhaust manifolds, oil pans and turbos/superchargers (if equipped). To aid in installation, your current engine and all attached accessories are to be kept except if they’re damaged in which case you are required to replace them. The installer responsible for replacing the radiator or transmission oil cooler, flush the transmission oil cooling lines, fill differential, adjust shifter mechanisms, replace external switches sensors & solenoids, replace all filters, replace all seals, replace pan gaskets and Relearn, Reset or Replace computers and clear all codes when installing a transmission. Re-learning or resetting the Transmission to the vehicle may involve towing (Not Driving) to a dealership of same manufacturer in order to be performed. In certain types of Transmissions, the TCM (transmission controlling computer) is incorporated with the Valve body which may require the valve body to be replaced. Transfer cases are not included with transmission from AWD automobiles. **FLAT RATE FREIGHT SHIPPING** **POLICY** Flat rate freights are only to business addresses or closest freight terminal pickup only, NO RESIDENTIAL DELIVERY for freights. If you wish to pick up your order from the closest freight terminal, contact us first before making your purchase, so we can provide you the address of the closest freight terminal, because you will need to use the address of the freight terminal as your shipping address during payment, if you wish to pick it up from the terminal. Flat rate freight does not include HI, PR and AK, WA, contact us first for freight quote if you are buying from these locations. BUYER IS RESPONSIBLE FOR ANY EXTRA COST ABOVE THE $200.

• Brand: Ford
• Type: Complete Assembly
• OE/OEM Part Number: 2.5L (VIN C, 8th digit, 4-153)
• Number of Cylinders: 4
• Block Type: Straight
• Engine Size: 2.5 L
• Mileage: 120,000- 214,000
• Manufacturer Part Number: RANGER, B2300, 2.5L (VIN C, 8th digit, 4-153)
• Country of Origin: United States
• Fuel Type: Gasoline