89 - 01 Buick Regal Chevy Lumina Center Console Flip Cup Holder Cupholder M6

**\*They used a variety of cup holders during these years. Please make sure you check your center console to confirm that your mounting holes are at the FRONT TOP of your console. The mounting pins on the cup holder measure 3-7/8" between the inside of them and 4-1/4" from end to end, so your console with between your  mounting holes needs to be somewhere within that range. This will NOT work with your console if your mounting holes are at the front bottom of your console. PLEASE ASK QUESTIONS if you are unsure and replacing a missing cup holder and do not know which style was installed from factory.** Up for purchase is a USED OEM center console cup holder for some 95-01 Lumina, 95-99 Monte Carlo, 92-96 Grand Prix and Buick Rendezvous vehicles. There were a wide variety of cup holders used for these center consoles during the 90s and early 2000s, so please make sure this fits your application prior to purchase. In good working mechanical condition. Will have various wear to the foam pieces, but most have little to no use on them. Span from end to end on the mounting bracket is 4-1/4" and 3-7/8" between the inside of the mounting pins. If you look at your center console, you should see two holes at the TOP FRONT of your console, NOT THE BOTTOM. If you have the bottom holes, you will require a different cup holder. The bottom hole span needs to be in that 3-7/8"-4-1/4" range for this to work. If you have any questions, please ask prior to purchase. **\*To prevent fraud, this item is stamped with a custom made heat stamp that melts a mark into an unseen portion of the part to prove that the part came from me. Returns for items damaged during shipping MUST bear this logo or else the claim will be dismissed. Any alteration to the marking will also cause the dismissal of a damage return. If you have any questions about this, please contact me prior to purchase.**

• Brand: GM
• Placement on Vehicle: Center