3/8" Tubing Line Repair Kit 4x Male Tube Nuts 2x Female Union Inv. Flare 5/8-18
Price:
$18.95
Ships From:
East Coast, US
Clicking on links to merchants on this site may result in this site earning a commission.
**3/8" tubing size - Line repair fittings kit. Enough for 2 line repairs** _**Fitting Thread size: 5/8"-18 - Designed for SAE inverted flare (double flare)**_ _**For SAE Inverted Flare type connections & fits the larger 3/8" size tubing**_ _**UPDATE**_ _**In the current kits, the tube nuts may have either a silver or gold tone finish. Lately they have been silver. I posted a photo with the silver tube nuts. All the unions are brass. The finish on the tube nuts can vary between silver to light gold tone to a darker gold tone. We also carry the individual items separately. You can message me if you have a preference and I will try to accommodate if possible.**_ _**Includes (4x) 5/8-18 Male Steel Tube Nuts & (2x) 5/8-18 Female Brass Inverted Flare Unions (Kit)**_ _**(for 3/8" tube size)**_ **_A fittings kit to help repair 3/8" tubing. Enough to make 2 repairs. See all details below_** **_We also carry a similar kits for 3/16", 1/4" & 5/16" brake tubing repair in other listings._** **NOTE: Check & confirm your tubing size prior to making a purchase.** **3/8" tubing is popular size for some transmission lines and fuel lines.** More kits on the way. Need more than we have listed? Just contact me and I can adjust for you. This kit will allow you to make 2 line repairs by cutting and re-flaring (double flare) your existing brake line to replace or add a new section of steel tubing to your existing setup. Very popular kit if you are in need of replacing or repairing a leaking, rusted or damaged tubing. For each repair will need to use (2) tube nuts and (1) inline female union. All are setup for an inverted flare (double flare type flare). You will need basic tools to finish this type of repair. As a minimum you will need a pipe cutter, a brake tubing flaring tool capable of doing a double-flare and lastly a length of 3/8" steel tubing of the necessary length to fit your repair. Also helpful in doing some repairs is the use of a tubing bender. Interchange part numbers: 121006, 105x6, 123600, 302x6 - may also be others. This listing has been setup for one of are valued customers. We normally have these items in stock. If you need more than we have listed, you can contact us to check and confirm available quantity and we can adjust the listing for you. **Details:** Each purchase includes a total of (6) pieces, (4) male tube nuts & (2) female unions. All are 5/8-18 inverted flare thread size and are intended to work with 3/8" tubing. Any questions just contact prior to making your purchase - Happy to assist. Thanks for looking. Pictures are representative of these items we normally carry. There may be minor variations to the finish but the tube nuts normally have a silver or gold-tone (lighter & darker) finish and the unions are made of quality high-pressure natural brass. **Don't need all the fittings? Just let me know and we can setup a single 3pc kit for you.**
- Bundle Description: Includes fittings for 2 line repairs. See details
- Custom Bundle: Yes
- Fitment Type: Performance/Custom
- Items Included: Male Tube Nuts, Female Brake Line Unions
- Manufacturer Part Number: 121006, 123600, 302x6, 105x6
- Material: Brass, Steel
- Placement on Vehicle: Front, Left, Lower, Rear, Right, Upper
- Brand: Edelmann
- Type: Fitting
- Interchange Part Number: 302x6, 105x6
- OE/OEM Part Number: 132600, 121006
- Features: Rust-Resistant
- Finish: Zinc Plated, Silver or Gold Tone Electroplated
