2pc 3/8-24 One-Man Caliper Speed Bleeder Screw Many Fitments 94-98 Ford Mustang

**Brand New Pair (2pc) One Man Brake Speed Bleeder Screws 3/8-24** _**Many, many universal fitments**. **Please see details above & below. Contact me prior to a purchase to confirm fitment.**_ _**Fits certain SN95 Mustang models up-to 1998 model year. See the chart below for additional details before purchase**_ _**Please read all details: Be aware that on certain vehicles this size may fit only the front or rear, neither or both front & rear calipers.**_ _Will it fit my caliper? We have no way of confirming actual fitment other than what the supplier has listed. Your caliper may be different that what is listed. Best option is to actually confirm your bleeder thread size and type before your purchase as there are no returns on the speed bleeders. Also, it has been brought to our attention that certain vehicles may need a "long style" bleeder as well. This bleeder measures approximately 0.765 inches behind the hex portion to the end the of the bleeder that makes the actual seal.. This means that you will not be able to tighten it any further because it may interfere with the caliper surface. We would consider this measurement a standard length bleeder. If you bleeder is longer than this you most likely will need a long bleeder and this may not work. You actual application may have specific requirements so please keep all of this in mind. If you need additional measurements of would like to confirm your fitment, just contact me prior to your purchase. Happy to help if possible._ _You need to determine what you need for your fitment prior to making a purchase as there are no returns for the speed bleeder screws. I have updated some of the common Mustang fitment with a little guide below. You can look at that for some help but please contact me if you are unsure as there still may be times there is another variation. I want to help you get what you need but we cannot accept returns on the bleeder screws. Thanks for your understanding and consideration._ **Shipping:** **We have recently added the option to ship via FedEx for a possible quicker delivery. Just choose this at checkout if preferred.** **Note on availability:** right now we have up-to (**2**) sets available. We have more on the way but they are on back-order. Consider this a pre-order special. Contact me to check on this before you make your purchase to confirm and get an ETA if necessary. I don't want any surprises for either of us. Thanks for your understanding. Fits Ford Mustang brake upgrades and many other fitments + Universal applications that use a 3/8-24 bleeder screw! - Also popular on Harley Davidson Motorcycles **Will these fit my Mustang?** ****Various Mustang Model Year Bleeder Size Requirements (not definitive):**** 79-93 Front Calipers: 3/8-24 bleeder (most) 79-93 Rear Drum Brake Wheel Cylinder: (1/4-28, unconfirmed) 94-98 GT/V6 Front Calipers: 3/8-24 bleeder 94-98 GTV6 Rear Calipers: M10-1.0 bleeder 94-98 Cobra Front Calipers: M10-1.0 bleeder (3/8-24 on some) 94-98 Cobra Rear Calipers: M10-1.0 bleeder 99-04 GT/V6 Front Calipers: M10-1.0 bleeder (most) 99-04 GT/V6 Rear Calipers: M10-1.0 bleeder 99-04 Cobra Front Calipers: M10-1.0 bleeder (most) 99-04 Cobra Rear Calipers: M10-1.0 bleeder These are intended to replace the factory bleeder screw, making available a speed bleeder any time brake bleeding is desired! These will also fit many other applications requiring 3/8-24 bleeder screw. This includes many Ford applications and others, including 1978 and newer Harley Davidson. Other sizes are available. If you know your bleeder size you can contact me to see if there is a Speed Bleeder available for your particular application. It has been brought to my attention that some Ford Mustang rear calipers may actually need a metric brake bleeder. From the best of our research if you do need a metric bleeder for your rear calipers, you would need the M10-1.0 bleeder. We also carry this size in another listing. **Note:** This will fit "most" 94-98 SN95 (GT & V6) Ford Mustang front disc brake calipers that use a 3/8-24 bleeder screw (94-98 GT/V6 front calipers) **You must confirm your fitment** if possible because we have heard of some variations. **Note on Metric bleeder fitments**: Some front calipers need a metric bleeder!  99-04 Mustang V6, GT are metric M10-1.0. Most of the Cobra front calipers I have seen also use a metric bleeder screw and the bleeder in this listing **will _not_** work. It may work on some Cobra rear calipers. Will work on most 1979-1993 Mustang OEM front brakes.Please confirm your fitment before you purchase! See list below. Contact me with your actual fitment and I will assist in the cross-reference if you are unsure of the actual bleeder thread size you need. We also carry the metric M10-1.0 speed bleeder screws. Contact me for details. **This bleeder screw interchanges with lots of part numbers including the following list**: 1666493, 3780788, 4126879, 4636591, 5455122, 556508J, 8M-2208, 8M-2208-A, E6DZ 2208-A, F0DZ 2208-A, F2UZ 2208-B, J3203313, J3210802, J8124560, J8129722 **From the manufacturer:** The patented bleeder screw with the built-in check valve. It is truly a one person bleeder screw.  Makes a very easy job of purging the brake system. When you need to bleed the brakes, just open the speed bleeder screw 1/4- 1/2 turn and pump the brake pedal to perform the bleeder operation.   When the pedal is depressed the pressure generated opens the check valve letting air and brake fluid out of the end of the Speed Bleeder. When you release the pedal and it returns to the up position, the check valve closes and prevents any air from reentering the system through the Speed Bleeder. When bubble free fluid is evident you close the Speed Bleeder. In the closed position it works just like your stock bleeder screw and prevents any brake fluid from leaking out. You can easily repeat this operation at a later date when you need to bleed your brakes again. The patented thread sealing system makes it easy to open the bleeder screw to perform the bleeding operation. **Save yourself a ton of time and aggravation during your brake bleeding maintenance A purchase of quantity (1) is for a pair (2) 3/8-24** b **leeder screws which is enough to do 2 calipers. If you need 4 of them just change the purchase quantity to two (2) and then click the buy it now option.****Note: it may take up to an additional 3-5 days for shipping on this item as they sometimes sellout locally. Contact me before you purchase to check current available stock if this is a problem. Thanks** **NOTE:** **Additional size speed bleeder screws are available by request. Normally we can get them in stock in just a few days. Below is a list of available sizes:** **3/8"-24 x 1-3/16" - in stock** **M10-1.5 x 33mm** **1/4"-28 x 1"** **5/16"-24 x 1"** **M8-1.25 x 28mm** **M10-1.0 x 33mm - in stock** **7/16"-20 x 1-1/4"** **M7-1.0 x 32mm** **M10-1.0 x 35mm** **Additional fitment information:** AMERICAN MOTORS(1967 - 1988)BUICK(1970 - 1978)CADILLAC(1970 - 1978)CHEVROLET(1970 - 1980)CHRYSLER(1968 - 2007)DODGE(1968 - 2008)EAGLE(1991 - 1997)FORD(1965 - 2007)GMC(1970 - 1978)JAGUAR(1980 - 1993)JEEP(1974 - 2006)LINCOLN(1965 - 2005)MERCURY(1965 - 2003)OLDSMOBILE(1970 - 1980)PLYMOUTH(1970 - 2001)PONTIAC(1970 - 1980) **Note on shipping:** Listed shipping is for the US lower 48 States. International shipping via internationally with the Global Shipping Program depending on your location. Contact me with any questions before you make your purchase. Happy to assist. Thanks for your understanding.  I have the fitting necessary to adapt the front passenger hard line to the newer front soft line (brake hose) in another listing.** **Please contact me if you have any questions.

• Other Part Number: 8M-2208-A
• Interchange Part Number: E6DZ 2208-A,
• Finish: plated
• Placement on Vehicle: Front, Left, Right
• Performance Part: Yes
• UPC: 037495127011
• Brand: AutoExtra/Dorman/Help
• Manufacturer Part Number: 12701