22LB Flow Matched Fuel Injector Upgrade Set Fits V8 5.0L 5.7L TPI

****Fuel Injector Upgrade using Genuine Bosch Gen 3 units**** ****3 Year Warranty, Unlimited Miles**** ****8 - Genuine Bosch Flow Matched Fuel Injectors Per Order**** ****Manufacturer**** **Genuine **BOSCH**\- Not aftermarket or Chinese** ****Flow rate**Same As Stock** ****High Impedance Coil**** **14 Ohms** ****Connector Type**** **EV1 - Same as original vehicle harness plug** ****Can be used on the following vehicles:**** **See vehicle chart by switching to desktop mode** ****Intended Use:**** **Update your old and defective units with a superior injector design.** **Tightly flow matched units will ensure smooth idle** **4-Hole Nozzle tips maximize fuel atomization / performance** ****DIRECT FIT - PLUG & PLAY - No modifications Required**** ****Don't risk fuel rail leaks / vacuum leaks by using the shorter**** ****injectors with "double lower o-rings" which cannot be**** ****safely attached to your fuel rail. Our proprietary**** ****product mounts exactly as your OEM units with rail clips.**** **Mobile device users, switch to "classic/desktop mode" to view AND verify compatibility in vehicle fitment chart.** ### Reconditioned in the USA using genuine brand names ONLY (Bosch, Denso, Delphi, Siemens, etc). We do not sell replicas or low quality imported injectors. **Reconditioning Process:** - Thorough Electrical Inspection to verify resistance is within specs - Disassemble and externally clean injectors - Internally clean via numerous ultrasonic baths while activating injectors using special solutions - Back-flush to remove any internal debris left behind (multi-step process) - Flow test injectors and gather data. If injectors are not back up to specs, the previous 2 steps are performed until we achieve the results we’re looking for. Depending on their condition some fuel injectors may spend up to 8 hours in ultrasonic baths. - Once injectors are back up to OE specifications they are then lubricated to extend shelf life - Injectors are reassembled with new OEM high quality components (seals, 0-rings, caps, filters etc..) - For quality assurance, injectors are flow tested one last time before being shipped **Warranty and Returns** \- **All** **warranty claims will be handled as exchanges only. Parts will not be** **eligible for return for a refund if used, you will receive replacements,** **no exceptions.** To be eligible for a return for a full refund, parts must be unused and in original packaging. If parts have been taken out of packaging and require re testing and re packaging,  a re stocking fee of up to 25% may be assessed. Return shipping will be covered by buyer.

• Brand: Bosch
• Manufacturer Part Number: 0280155-4hole-OE