1967-71 MOPAR A B C E-BODY BIG BLK 383-440 WATER PUMP HOUSING 2780987 VGC REDONE

**Here for your consideration is this very good condition refinished original used 1967-71 Mopar A, B, C, E-body big block (383, 440, 426 Hemi) cast iron factory water pump housing, #2780987.   This housing had all the old pipes carefully removed, as well as plugs,  and sensors, and then was de-greased, cleaned, and given a thorough sand blasting to clean bare metal.   It was then put in a primer to help prevent rust.   Ready for you to paint your choice of engine colors.   Overall, this is a clean piece, with no bad corrosion or pitting.   The machined mating surfaces to block all look good, and with a new gasket and sealant, should seal up fine on this piece.   All threads in this look good and not stripped out, and with some sealant on them, should seal up fine.   No cracks, chips , or holes in housing.    All outer face surfaces of this look good and should look even better painted (by you) in color of your engine.   Save time and a lot of grief with this redone one over others out there that will require a lot of work and effort to get this nice (if you are lucky that is!). Be sure to put in that good bid today!   Thanks for stopping in to look and bid!** **\\_\\_\\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_** **\*Always an interesting selection of quality-select parts from out of my extensive 42-year collection of Mopar parts. One of the largest and most-varied in the upper Midwest!   From top to bottom, and from inside to outside, I've just about had it ALL over the years!!** **\*Check out my other select 1963-74 Mopar A, B, C, and E-body parts. A little something for everyone, at realistic opening bid and B.I.N. prices!   New quality items listed almost every day.   No stale, static listings with the same old dull items here! This allows me to know you are satisfied with your merchandise, and that I have done my job well to make sure you are well satisfied in every way.   I will then be sure to leave feedback for you as well! I'M ALSO ALWAYS A _BUYER_ FOR QUALITY USED, REPRODUCTION, AND NOS 1963- 1974 MOPAR A, B, AND E-BODY PARTS TO ADD TO MY DIVERSE INVENTORY. FROM A SINGLE ITEM TO A BARN- FULL, LET ME KNOW WHAT YOU HAVE OR KNOW OF. THANKS!**

• Brand: Orig Mopar, as used 1967-71 A, B, C, E-body big block V-8s.
• Type: Cast iron water pump housing to engine block front .
• Housing Material: Cast iron, as is stock.
• OE/OEM Part Number: Overall nice smooth piece, not badly corroded. Not damaged.
• Items Included: Just the housing, as shown here.
• Manufacturer Part Number: Cast with Chrylser part # 2780987.
• Drive Type: Belt Driven
• Features: All peripheral pieces removed. Blasted and put in primer.
• Impeller Material: Steel, but does not include the water pump or an impeller.