1928 - 1931 Model A Ford Distributor - Rebuilt and Updated with New Internals 1e

**Model A Ford Distributor - Rebuilt and Updated - New Internals** This is an original Model A Ford distributor that will fit 1928 1929 1930 1931 Model A car or truck 4 cyl engine. It has been completely refurbished and rebuilt, including: - complete disassembly and cleaning, body bead basted, primed and painted black (automotive grade paint). - a new shaft, cam, cam screw, upper and lower thrust washers - the short pigtail wireon the lower plate was replaced with an improved longer wire upgrade (designed to not break and short like originals often did). - upper plate and lower plate with original style points (preferred by many people - very easy to set and adjust point gap). - new condenser, condenser fiber washer and copper screw. - new clamp arms, clamp brass rivets installed - distributor was reassembled and checked out thoroughly. My distributors might be a little more expensive than some others you might find, but I hate to cut corners just to save a few dollars so I replace pretty much everything in question or if I find something visually displeasing. New: - Upper Shaft - Lower Shaft - Cam and cam screw - Clamp Arms - Clamp Rivets - Distributor Shaft Sleeve - Distributor Shaft Pi - Thrust Washer .015 Steel (upper) - Thrust Washer .045 Fiber (lower) - Condenser - Condenser Fiber Washer - Condenser Screw Copper 10/32 - Point mount kit Refurbished: - Distributor Body The cam has been greased and the bushings oiled. I included a little container of red cam grease for future maintenance. **_My General Disclaimer for all listings..._** _Please_ _note: You are buying parts for a vintage vehicle/motorcycle so there_ _may be nicks, scratches, cracks, dents and other minimal wear that one_ _would expect. Please look at the photos closely, what you see is what_ _you get. I attempted to describe the parts to the best of my_ _ability/knowledge, so ask questions and do your own research to confirm_ _proper fitment for your application. Some items might need additional_ _adjustments, modification, parts or machining to fit your application._ _All items are sold as is, with no warranty expressed or implied. Please no returns or refunds, as all sales are final._ _Thanks_ _Lot #1e_ _\- The last 2 photos are for ref to show the new parts used in the builds (no extra parts other than lower shaft)_

• Brand: Ford
• Type: Distributor
• Vintage Part: Yes