16 PSI LS1511 ML Polished Beehive Valve Springs 1.290" .625” Lift W Hardware LS

These are a nascar take off from an Ilmore spec motor $600 set new SPRING O.D. 1.290″ OUTER ID 0.630″ SEAT PRESSURE 130 lbs @ 1.800″ OPEN PRESSURE 370 lbs @ 1.175″ RATE lbs/in. 384.0″ MAX LIFT 0.625″ COIL BIND 1.100″ This listing includes locks / keepers, retainers, seats, and used seals \*\*I have another listing with the springs by themselves, no hardware for non LS applications\*\* 1500 Series This series has all the benefits of the 1200’s plus an additional nitriding operation. The nitriding process, which is also done in-house, increases the strength at the surface of the wire and at the same time causes a slight softening of the core material. This trade-off in hardness results in a gain in endurance for the Circle Track and Road Circuit teams who are limited by the onset of fatigue at the wire surface. Since Drag racers are not limited by endurance, the loss of core hardness does not make nitriding suitable for their applications. Max Life Surface Preparation (ML) A proprietary, multi-step surface enhancement process that has been proven to increase spring endurance, Max Life processing is available for any level of PSI spring and is very beneficial for those looking for increased endurance while maintaining their existing set-up.

• Brand: PSI Performance
• Manufacturer Warranty: No Warranty
• Manufacturer Part Number: LS 1511 ML
• Finish: Polished